IBM M110 Network Parameters, Network Configuration Internet Address, Print Server, Print Screen

Page 22

4.1.4 Network Parameters

Use this screen to set your network configuration parameters, including Internet Address. Usually you only need to set the SpotLine’s IP address and enable the print server if you are going to use the printer attached to this terminal as a system wide independent printer.

USA-0212-000003

Network Configuration

Internet Address
Spot :	194.2.32.52
Gateway :	0.0.0.0
Name Server :	0.0.0.0
File Server :	0.0.0.0
SubNet Mask :	0.0.0.0
Print Server
Active :	[ No ]
Protocol :	[ LPD ]
Default Queue Name :	DEFAULT
Printer :	[ Parallel ]
Print Screen
Mode :	[ Local ]
Destination Host :	[ None ]
Queue Name :
Enter: Save Arrows/Tab: Next Field	F4: Clear Field Esc: Cancel

Spot: The Internet IP address of this terminal, e.g. 194.2.32.52.

Note: This addres must be unique on your network and must be homogeneous (same class of addresses) to the other terminals on the network.

Gateway: This IP address is for any gateway on your network. By default if it Is set to 0.0.0.0. no gateway is being used.

22

Image 22

Contents SpotLine TM M110 SpotLine M110 User Guide FCC Statement Table of Contents SpotLine M110 User GuideWarranty Introduction Page Specifications Page Installation Getting StartedSetup PingUsage Configuration SetupMain Menu User Environment User EnvironmentScreen Saver Language Color SetupDefault Sessions System Key KeyboardBeeper Port Configuration Status LineData TypeSpeed ParityLine FlowHost Sessions SessionsEmulation Printer MonitorMedia AutoTerm Print Server Network Configuration Internet AddressNetwork Parameters Print ScreenPage Print Server Protocol Active Active For activation of Print Server No, YesSystem Key + P Destination Host Host NameMode Host TableExit without Saving Using the SpotLine M110 Terminal as a Terminal Server Reverse TelnetPage Remote TTY for Unix Systems Example rttyd /dev/ptyp8 s110tcp serial1 2j8.log 1&2 Purge the Printer Buffer Reversal of the LED’s for Num. Lock and Caps LockScroll Lock + Backspace Programming function keys F1- F24 Function Key ResetFunction Key Scroll Lock + SpaceKey Hexadecimal ExamplesMultiscreen Session Switching How to declare SCO mscreen for SpotLine TerminalsTelnet Session Telnet ConnectionPage SCO XENIX/Unix Software ConfigurationSetting up the LAN Terminal for Printing Use as a Telnet Session LAN TerminalPage Use as a Serial Terminal Use as a Serial AIX Terminal Device Use with IBM’s AIX UnixUse as a Telnet terminal Enter the device name for the SpotLine in /etc/hosts Enter a local queue nameEnter any printer device name you wish Other Unix Versions Tic scoansi.tiUse with Other Operating Systems Use as a LAN terminalCabling Terminal to Host CablingSerial Printer Cabling Keyboard Control Characters EmulationGeneral Key Scan CodePage Screen Control Parameters Where T has the value Local Printer Control Codes Ansi and AT386 Emulation Additional ESC Commands Reverse Direction of Serial Port Warranty