Fujitsu V1020, V700 manual Drive1 Submenu of the System Menu, Advanced Security Boot Exit

L i f e B o o k V S e r i e s B I O S

Drive1 Submenu of the System Menu

The Drive1 submenu allows you to configure secondary ATA devices.

		Phoenix TrustedCore(tm) Setup Utility
Info	System	Advanced	Security	Boot	Exit
	Drive1 [HL-DT-ST DVDRAM_GSA_T20N]				Item Specific Help
Type:		[Auto]			Select Serial ATA/IDE
					drive installed here.
Transfer Mode:		[Standard]
Ultra DMA Mode:		[Disabled]			[Auto]
					The BIOS auto-types the
					drive on boot time.
					[None]
					The drive is disabled.

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/Space	Change	Values
Enter	Select	▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 4. Drive1 Submenu

Table 4: Fields, Options and Defaults for the Drive1 Submenu of the System Menu

Menu Field	Options		Default	Description
Type:	■	Auto	[Auto]	NOTE: The Type field does not appear as a drop-down menu. Tap
	■	None		the spacebar to toggle the selections.
				Selects the ATA/ATAPI device type. Select Auto to have the type
				automatically identified by the BIOS at POST. If None is selected, all
				of the following setup items do not appear.
Transfer Mode:	■	Standard	[Standard]	This option cannot be changed (automatically identified by the
	■	Fast PIO 1		BIOS).
	■	Fast PIO 2		Selects the method for moving data to/from the drive. Autotype the
	■	Fast PIO 3
	■	Fast PIO 4		drive to select the optimum transfer mode. Multi-word DMA is
	■	Multiword DMA 1		automatically set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3,
				and set to mode 2 for Fast PIO 4 / DMA.
	■	Multiword DMA 2
Ultra DMA	■	Disabled	[Disabled]	This option cannot be changed (automatically identified by the
Mode:	■	Mode 0		BIOS).
	■	Mode 1		Selects the method for moving data to/from the drive. Autotype the
	■	Mode 2
	■	Mode 3		drive to select the optimum transfer mode.
	■	Mode 4
	■	Mode 5

8