Philips AZ1080/00 manual Troubleshooting, Problem Solution

Page 14

AZ1080/00A 03/13/02 10:06 Page 13

Troubleshooting

If a fault occurs, first check the points listed below before taking the set for repair. Do not open the set as there is a risk of electric shock.

If you are unable to remedy a problem by following these hints, consult your dealer or service centre.

WARNING: Under no circumstances should you try to repair the set yourself, as this will invalidate the guarantee.

English

Problem

Solution

 

 

No sound

– Adjust the VOLUME

 

 

No power

– Mains lead not securely connected.

 

Connect AC mains lead properly

 

– Batteries exhausted /incorrectly inserted.

 

Insert (fresh) batteries correctly

Display does not function properly/ No reaction to operation of any of the controls

– Electrostatic discharge

Switch off and unplug the set. Reconnect after a few seconds.

Er indication

– No CD inserted, insert a CD

 

– CD badly scratched/ dirty.

 

Replace/ clean CD (see maintenance)

 

CD-R(W) is blank or the disc is not finalized.

 

Use a finalized CD-R(W)

 

– Laser lens steamed up.

 

Wait until lens has cleared/acclimatized

 

 

CD playback does not work

– CD badly scratched/ dirty.

 

Replace/ clean CD (see maintenance)

 

 

The CD skips tracks

– CD damaged or dirty. Replace or clean CD.

 

– Shuffle is active. Quit shuffle mode

 

 

Poor cassette sound quality

– Dust and dirt on the heads, etc.

 

Clean deck parts, see maintenance.

 

– Use of incompatible cassette types (METAL or

 

CHROME). Only use NORMAL (IEC I) for recording

 

 

Recording does not work

– Cassette tab(s) may be broken. Apply a piece of

 

adhesive tape over the missing tab space.

13

Image 14 Philips AZ1080/00 manual Troubleshooting, Problem Solution
Contents Audio Italia Important notes for users in the U.KNorge AZ1080/00A 03/13/02 1006 English Index SuomiClass Top and front panels Power SupplyControls For users in the U.K. please follow the instructions onSwitching power on/off Save energy Power SupplyUsing AC Mains General operationCD Player Radio CD-PlayerRadio reception Display indication for CD functionsFinding a passage within a track Selecting a different trackPlay modes Repeat can be selected or changed Cassette playback Cassette RecorderGeneral information on recording Synchro Start CD recordingRecording from the Radio RecordingSelecting and recording a particular passage To stop recording Press StopopenTape deck maintenance MaintenancePrecautions General Maintenance CD player and CD handlingTroubleshooting Problem Solution