Fujitsu S7020D manual Serial ATA Port 0 Submenu of the Main Menu, Auto

L i f e B o o k S S e r i e s N o t e b o o k B I O S

Serial ATA Port 0 Submenu of the Main Menu

The Serial ATA Port 0 submenu identifies what Serial ATA/IDE devices are installed.

Note that actual hard drive label shown may vary. Depending on the drive type, information such as cylin- ders, heads and sectors may also be displayed.

PhoenixBIOS Setup Utility

Main

Serial ATA Port 0 [FUJITSU MHT2080BH-SATA]		Item Specific Help
Type:	[Auto]	Select Serial ATA/IDE
	LBA Format	drive installed here.
Total Sectors:	156301488
		[Auto]
Maximum Capacity:	80026MB	The BIOS auto-types the
		drive on boot time.
		[None]
		The drive is disabled.

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/Space	Change	Values
Enter	Select	▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 2. Serial ATA Port 0 Submenu

Menu Field	Options		Default	Description
Type:	■	Auto	[Auto]	Select Auto to have the type of Serial or Parallel ATA device auto-
	■	None		matically identified by the BIOS at POST. If None is selected, the fol-
				lowing Set-up items do not appear.
LBA Format				Logical Block Addressing (LBA)
Total Sectors:	---		---	The total number of sectors on your hard disk
Maximum	---		---	The maximum capacity of your hard disk
Capacity:

6