Fujitsu S6520 manual Boot Device Priority Submenu of the Boot Menu, Exiting from Boot Menu

S e c u r i t y M e n u

Boot Device Priority Submenu of the Boot Menu

The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.

■Be careful of the operating environment when booting from a CD or you may overwrite files by mistake.

■A bootable CD-ROM has either a floppy disk format or a hard drive format. When the bootable CD-ROM is used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk for-

mat is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if

the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: designation

if a formatted internal hard drive is present since the C: designator is always reserved for the internal hard drive.The boot sequence ignores the new drive designations, however, your application software will use the new designations.

		Phoenix SecureCore(tm) Setup Utility
	Info	System	Advanced	Security	Boot	Exit
		Boot Device Priority			Item Specific Help
Boot priority order:					Keys used to view or
1:	Floppy Disk Drive
					configure devices:
2:	Drive0 HDD: FUJITSU MHY2200BH
3:	CD/DVD Drive				<+>/<Space> or <->
4:	NETWORK: Marvell LAN
					moves the device up or
5:
					down.
6:
					<x> exclude or include
7:
					the device to boot.
Excluded from boot order:
:	USB MEMORY: None
:	USB HDD: None

F1 Help	Select	Item
ESC Exit	Select	Menu

-/Space	Change	Values
Enter	Select	▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 19. Boot Device Priority Submenu

Table 19: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu

Menu Field	Description
Boot priority order:	The boot selections determine the order in which the BIOS searches for the operating system during a
1: Floppy Disk Drive	startup sequence. To change the order, highlight one source by using the [up] or [down] cursor keys and
2: Drive0:	then press the [+] or [-] key to change the order number. Tapping [x] removes from the list a device that is
3: CD/DVD Drive	not installed. Tapping [x] on an item in the Excluded list adds the device to the Boot priority list. Be sure to
4: NETWORK:	save your changed order when you exit the BIOS setup utility.
5:	NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be
6:
7:	overwritten, depending upon your operating environment.
Excluded from boot order:
: USB MEMORY:
: USB HDD:

Exiting from Boot Menu

When you have finished setting the boot parameters with the Boot Menu, you can either exit from the setup utility or move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys.

27