Fujitsu S7110 manual Fields, Options and Defaults for the Security Menu, Password

					S e c u r i t y M e n u
Table 13: Fields, Options and Defaults for the Security Menu
Menu Field	Options		Default	Description
Supervisor	–—		Clear	A display-only field. Set is displayed when the system Supervisor
Password is:				Password is set and Clear when it is not.
User Password is:	–—		Clear	A display-only field. Set is displayed when the general User Password is
				set, and Clear when it is not.
Set Supervisor	[Enter]		[Enter]	Sets, changes or cancels Supervisor Password. The Supervisor Password
Password				may be up to seven characters long and include only letters or numbers
				(no symbols). Passwords are NOT case- sensitive. To cancel a password
				press the Enter key instead of entering characters in the Enter New Pass-
				word field and in the Re-enter New Password field. When a Supervisor
				Password is set it must be used to access the BIOS setup utility.
Set User Password	[Enter]		[Enter]	This field can only be accessed if the Supervisor Password is set. Sets,
				changes or cancels the User Password. The User Password may be up to
				seven characters long and must include only letters or numbers (no
				symbols). Passwords are NOT case-sensitive. To cancel a password press
				the Enter key instead of entering characters in the Enter New Password
				field and in the Re-enter New Password field. When a User Password is
				set it must be used to access the BIOS setup utility.
Minimum User	[0]		[0]	Sets the minimum length for User Password.
Password Length:
Password on Boot:	■	Disabled	[Disabled]	When Enabled, a password (User or Supervisor) is required after the
	■	First Boot		Power On Self Test (POST) before the operating system will be read from
	■	Every Boot		a disk. When set to Disabled no password is required. If no Supervisor
				Password is set this feature is not available and no password is required.
On Automatic	■	Disabled	[Disabled]	This field is active only when Password On Boot is set to First Boot or
Wake up:	■	Enabled		Every Boot. When disabled, password entry is not required on automatic
				wake up on LAN or Real Time Clock. When enabled, the password is still
				required on automatic wake up.
KB Lock on	■	Disabled	[Disabled]	When set to Enabled, the keyboard and mouse inputs are locked out
Resume:	■	Enabled		upon Suspend from Resume or Save-to-Disk mode until the password is
				entered. When both passwords are set, the User password is always used
				to lock. Password entry before OS boot is disabled upon unattended
				boot.
Boot from	■	All	[All]	Enable password allows supervisor access only.
Removable Media:	■	Supervisor only
Flash Write:	■	Disabled	[Enabled]	When disabled, the BIOS Flash memory is write protected.
	■	Enabled
Hard Disk Security	–—		–—	When selected, opens the Hard Disk Security submenu, which allows you
				to configure hard disk security features.
Owner	–—		–—	When selected, opens the Owner Information submenu, which allows
Information				you to set Owner information.
Security Chip	–—		–—	When selected, opens the Security Chip Settings submenu, which allows
Setting				you to set Security Chip information.
Security Panel On	■	Disabled	[Enabled]	Allows the Security Panel Feature to be enabled or disabled upon
Resume	■	Enabled		Suspend from Resume.

23