Fujitsu P1510D Primary Master Submenu of the Main Menu, LBA Format Logical Block Addressing LBA

M a i n M e n u

Primary Master Submenu of the Main Menu

The Primary Master submenu identifies which ATA devices are installed.

Note: Actual hard drive label shown may vary. Depending on the drive type, information such as cylinders, heads and sectors may also be displayed.

		PhoenixBIOS Setup Utility
Main	Advanced	Security			Power	Boot	Info	Exit
	Primary Master [TOSHIBA MK2003GAH -(PM)]							Item Specific Help
Type:							Select Serial ATA/IDE
				[Auto]
		LBA Format					drive installed here.
Total Sectors:			39062520				[Auto]
Maximum Capacity:			20000MB
							The BIOS auto-types the
Multi-Sector Transfers:			[16 Sectors]				drive on boot time.
LBA Mode Control:			[Enabled]				[None]
Transfer Mode:			[Multiword DMA 2]
Ultra DMA Mode:			[Disabled]				The drive is disabled.

F1 Help	Select	Item
ESC Exit	Select	Menu

-/SpaceChange Values

Enter Select ▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 2. Primary Master Submenu

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field	Options		Default	Description
Type:	n	Auto	[Auto]	Selects the Serial ATA/IDE device type. Select Auto to have the
	n	None		type automatically identified by the BIOS at POST. If None is
				selected, all of the following Set-up items do not appear.

LBA Format			Logical Block Addressing (LBA)
Total	---	---	The total number of sectors on your hard disk
Sectors:
Maximum	---	---	The maximum capacity of your hard disk
Capacity:

5