P C C a r d s
PC Card Slot
PC Card
Eject Button
Figure 4-6 Installing/Removing PC Cards
PC Cards
Your Fujitsu LifeBook supports Type I, Type II and Type
IIIPC Cards, which can perform a variety of functions depending on which type of PC Card you install. You can install one or two PC Cards at a time, depending on its type. Type I and Type II PC Cards can be installed together, while Type III PC Cards must be installed alone.
Some available PC Cards:
■Zoomed Video cards (Type II, Slot 1 only).
■Fax/data modem cards (Type II).
■Local area network (LAN) cards (Type II).
■IDE
■SCSI cards (Type II).
■ATA cards (Type III).
■Other PC Cards that conform to PCMCIA 2.1 or CardBus standards.
For further information, refer to the instructions supplied with your PC Card.
W A R N I N G
Do not insert a PC Card into a slot if there is water or any other substance on the card as you may perma- nently damage the card, your LifeBook, or both.
1.See your PC Card manual for specific instructions on the installation of your card. Some PC Cards may require your LifeBook to be Off while installing them.
2.Make sure there is no PC Card currently in the slot. If there is, see Removing PC Cards.
3.Insert your PC Card into the slot, with the product label facing up.
4.Push the card into the slot firmly until it is seated in the opening. You will hear a click and the Eject button will pop away from your LifeBook.
5.Flip the Eject button towards the front of your LifeBook.
6.Lock the PC Card into the slot by sliding the Lock button toward the front of your LifeBook.
INSTALLING PC CARDS
PC Cards are installed in the PC Card slot. To install a
PC Card(s), follow these easy steps:
W A R N I N G
Installing or removing a PC Card(s) during your Life- Book’s shutdown or bootup process may damage the card and/or your LifeBook.
47