A d v a n c e d M e n u
Table 4: Fields, Options and Defaults for the Serial/Parallel Port Configurations Submenu of Advanced Menu
Menu | Options | Default | Description | |
Field | ||||
|
|
| ||
|
|
|
| |
Serial Port: | • Disabled | [Enabled] | Configures the serial port using either no configuration (Disabled), | |
| • Enabled |
| a user defined configuration (Enabled), or by allowing the BIOS or | |
| • Auto |
| OS to choose the configuration (Auto). | |
|
|
|
| |
I/O | • 3F8 - 3FF | [3F8 - 3FF] | Allows user to set the serial port base I/O address when serial port | |
Address: | • 2F8 - 2FF |
| is Enabled. | |
| • 3E8 - 3EF |
|
| |
| • 2E8 - 2EF |
|
| |
|
|
|
| |
Interrupt: | • IRQ 3 | [IRQ 4] | Allows user to set the serial port interrupt when serial port is | |
| • IRQ 4 |
| Enabled. | |
| • IRQ 10 |
|
| |
| • IRQ 11 |
|
| |
|
|
|
| |
Touch | • Disabled | [Enabled] | Enables or disables the Touch Panel, or allows the Plug & Play | |
Panel: | • Enabled |
| operating system to choose the configuration (Auto). | |
| • Auto |
|
| |
|
|
|
| |
I/O | • | [2E8 - 2EF] | Allows user to set the touch panel I/O address when the touch | |
Address: | • |
| panel is Enabled. | |
| • 3E8 - 3EF |
|
| |
| • 2E8 - 2EF |
|
| |
|
|
|
| |
Interrupt: | • IRQ 3 | [IRQ 3] | Allows user to set the touch panel interrupt when the touch panel | |
| • IRQ 4 |
| is Enabled. | |
| • IRQ 10 |
|
| |
| • IRQ 11 |
|
| |
|
|
|
| |
Parallel | • Disabled | [Enabled] | Configures the parallel port using either no configuration (Dis- | |
Port: | • Enabled |
| abled), a user defined configuration (Enabled), or by allowing the | |
| • Auto |
| BIOS or OS to choose the configuration (Auto). | |
|
|
|
| |
Mode: | • Output Only | When the parallel port is enabled this option is available allowing | ||
| • |
| the user to set the mode for the parallel port. | |
| • ECP |
|
| |
|
|
| connected parallel device. Output Only (Half Duplex) allows infor- | |
|
|
| mation to be transferred in only one direction, from your notebook | |
|
|
| to the printer or similar device. ECP Mode allows communication | |
|
|
| with the ECP class of parallel I/O devices. | |
|
|
|
| |
I/O | • 378 - 37F | [378 - 37F] | Allows user to set the parallel port base I/O address when the | |
address: | • 278 - 27F |
| parallel port is Enabled. | |
| • 3BC - 3BF |
|
| |
|
|
|
| |
Interrupt: | • IRQ 5 | [IRQ 7] | Allows user to set the parallel port interrupt when the parallel port | |
| • IRQ 7 |
| is Enabled. | |
|
|
|
| |
DMA | • DMA 1 | [DMA 1] | This appears when parallel port is Enabled and Mode is set to ECP. | |
Channel | • DMA 3 |
| Selects the direct memory access channel for the parallel port. | |
|
|
|
|
11