Fujitsu AH512, A512 manual Preparing to remove components, Installing and removing memory expansion

Page 54

Removing and installing components during servicing

Preparing to remove components

If you are going to remove or change system components, prepare for the removal as follows:

Please observe the safety information in chapter "Important notes", Page 12. Remove the power plug from the mains outlet !

►Switch the device off.

The device must not be in energy-saving mode !

►Close the LCD screen.

►Remove all the cables from the device.

►Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an anti-slip cloth on this surface to prevent the device from being scratched.

►Remove the battery (see "Removing the battery", Page 30).

Installing and removing memory expansion

If you are asked by the Hotline/Service Desk to remove and install the memory expansion yourself, proceed as follows:

Please observe the safety information in chapter "Important notes", Page 12.

When installing/removing memory modules, the battery must be removed from the notebook and the notebook must not be connected to the power supply, see "Preparing to remove components", Page 50.

Only use memory expansion modules that have been approved for your notebook (see "Technical data", Page 66).

Never use force when installing or removing a memory extension.

Make sure that foreign objects do not fall into the memory extension compartment.

You must open the service compartment to remove or install a memory module. On some devices, opening the compartment may expose other components. These components should be removed and replaced only by authorised specialists. Therefore, be sure to observe the following:

Individual components can become very hot during operation. Therefore, we recommend that you wait one hour after switching off the notebook before removing or installing memory modules. Otherwise, there is a risk of suffering burns!

As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page 49.

50

Fujitsu

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Lifebook A512 Lifebook AH512 Page Page Contact Copyright Lifebook A512 Lifebook AH512 Remarks TrademarksCopyright Contents Removing and installing components during servicing External monitor is blank or the image is unstable Contents Innovative technology Further informationInnovative technology Not switch off the device Notational conventionsThis font Ports and controls Ports and controlsPorts and controls Left panel Right-hand sidePorts and controls Underside Important notes Safety notesAdditional safety notes for devices with radio components Important notesEnergy saving under Windows Energy savingTravelling with your notebook Before you travelCleaning the notebook First-time setup of your device First-time setup of your deviceUnpacking and checking the device Mains adapter connecting Selecting a locationSwitching on the device for the first time Status indicators Working with the notebookWorking with the notebook Battery charging indicator/power connector Working with the notebook Status indicators DescriptionPower-on indicator/Standby Drive indicatorSwitching on the notebook Keyboard + =Enter key return Working with the notebook Key Description Backspace keyTab key Caps Lock keySwitching the wireless components on / off Separate number blockKey combinations Display if an external monitor is connected Power management functionsSwitch between open applications Windows security/Task-ManagerCountry and keyboard settings Touchpad and touchpad buttonsMoving the pointer Selecting an item Executing commandsSwitching the Touchpad on and off Dragging itemsLCD screen ExampleBackground lighting Rechargeable battery WebcamMonitoring the battery charging level Charging, caring for and maintaining the batteryRemoving and installing the battery Battery storageRemoving the battery Optical drive Handling data carriersCD/DVD indicator Inserting or removing a data carrierManual removal emergency removal Using the power-management features Memory cards Supported formatsInserting the memory card Removing the memory card ExpressCards Inserting the cardLoudspeakers and microphones Removing the cardWireless LAN/Bluetooth radio components Switching the wireless components on and offSetting up Wlan access Ethernet and LAN Using the Security Lock Security functionsSecurity functions Configuring password protection in Bios Setup Utility Protecting Bios Setup Utility supervisor and user passwordPassword protection for booting of the operating system Changing the supervisor or user passwordPassword protection for the hard disk Activating hard disk protectionConnecting devices to the notebook Connecting external devicesConnecting external devices Disconnecting devices from the notebookConnecting an external monitor Hdmi portConnecting USB devices How to remove USB devices correctlyDevice drivers Connecting external audio devices Microphone port/LineHeadphone port Removing and installing components during servicing Removing and installing components during servicingInstalling and removing memory expansion Preparing to remove componentsRemoving the cover Removing memory modulesInstalling a memory module Securing the coverRemoving and installing the hard disk Removing a coverRemoving a hard disk Installing a hard disk Finishing component removal Attaching the coverOperating Bios Setup Utility Settings in Bios Setup UtilityStarting the Bios Setup Utility Settings in Bios Setup UtilityExiting Bios Setup Utility Load Setup Defaults Copy Standard EntriesSave Changes and Power Off Troubleshooting and tips Help if problems occurTroubleshooting and tips Restoring the hard disk contents under Windows External monitor is blank or the image is unstable LCD screen is difficult to readExternal monitor remains blank CauseTroubleshooting and tips Cause Printer does not print Radio connection to a network does not workAcoustic warnings Error messages on the screen Error message/cause ResolutionPrevious boot incomplete Default configuration Technical data Power adapter, 65 WDisposal and recycling Manufacturer’s notesEnergy Star Declarations of ConformityRegulatory information for notebooks without radio device CE markingRegulatory notices CE marking for devices with radio componentManufacturer’s notes DOC Industry Canada notices Avis Aux Utilisateurs Du Réseau Téléphonique CanadienUL Notice For Authorized Repair Technicians OnlyFCC Interference Statement FCC regulatory information for notebooks with radio deviceFederal Communications Commission statement FCC Radio Frequency Exposure statementManufacturer’s notes Regulatory Information/Disclaimers Export restrictionsFault IndexIndex Handling Index Switch

A512, AH512 specifications

Fujitsu A512 and AH512 laptops represent a blend of performance, durability, and versatility that caters particularly to business users and students. Both models are designed to meet the demands of various professional and educational environments, ensuring reliability and efficiency in daily operations.

One of the standout features of the A512 model is its robust design, crafted to withstand the rigors of frequent travel. The chassis of the A512 is not only sturdy but also lightweight, making it an ideal companion for on-the-go professionals. The laptop boasts a 15.6-inch display that offers crisp visuals, making it suitable for presentations, document editing, and multimedia consumption. The anti-glare screen technology ensures comfortable viewing in various lighting conditions, which is essential for business users who often work outdoors or in bright environments.

In terms of performance, the A512 is powered by the latest Intel processors, providing users with the speed and efficiency required for multitasking and demanding applications. With options for up to 16GB of RAM, the laptop can easily handle simultaneous applications, making it perfect for users who run complex software or work with large datasets.

The AH512 variant offers similar specifications but comes with enhanced features tailored for advanced business needs. It includes a comprehensive set of security features, such as a fingerprint reader and TPM (Trusted Platform Module) for secure data encryption. This is particularly important for organizations that prioritize data protection and need to comply with various regulatory standards.

Both models come equipped with SSD options, significantly improving boot times and application loading speeds compared to traditional HDDs. Additionally, the inclusion of multiple USB ports, an HDMI output, and a card reader ensures that users can connect various peripherals with ease. The long-lasting battery life of both laptops allows for extended use during meetings, lectures, or while traveling without the need for frequent recharging.

Fujitsu’s commitment to sustainability is reflected in the energy-efficient components used in the A512 and AH512, reducing their environmental impact. With comprehensive support and services from Fujitsu, users can be confident in the long-term usability of these laptops.

In summary, the Fujitsu A512 and AH512 are well-rounded laptops that specify performance, security, and durability, making them excellent choices for business professionals and students alike. Whether it’s for presentations, complex tasks, or simple note-taking, these laptops are designed to deliver reliability and efficiency in every scenario.
Top Page Image Contents