Fujitsu B2630 manual Exiting from Main Menu

M a i n M e n u

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field	Options	Default	Description
Sectors:	• A number	–—	This item appears only when the type is identified as Hard
	between 0		Disk. When Hard Disk is selected, you can change the value.
	and 63		This field is changed by incrementing (pressing the [Space-
			bar]) or by typing in the number.
Maximum	• Display only	–—	Displays the maximum capacity of the drive calculated from
Capacity:			the parameters of the hard disk when Hard Disk is selected.
Multi-Sector	• Disabled	[16 Sectors]	This option cannot be changed when Auto is selected. Specify
Transfers:	• 2 Sectors		the number of sectors per block for multiple sector transfer.
	• 4 Sectors
	• 8 Sectors
	• 16 Sectors
	• 32 Sectors
	• 64 Sectors
	• 128 Sectors
LBA Mode	• Disabled	[Enabled]	Enables or disables logical Block Addressing in place of Cylin-
Control:	• Enabled		der, Head, Sector addressing. This option cannot be changed
			when Auto is selected.
PIO Transfer	• Standard	[Fast PI0 4]	Selects the method for moving data to/from the drive. Auto-
Mode:	• Fast PIO 1		type the drive to select the optimum transfer mode. This
	• Fast PIO 2		option cannot be changed when Auto is selected. Multi-word
	• Fast PIO 3		DMA is automatically set to mode 1 for Fast PIO 1, Fast PIO
	• Fast PIO 4		2, Fast PIO 3, and set to mode 2 for Fast PIO 4 / DMA.
DMA Transfer	• Disabled	[Ultra DMA 2]	Selects the method for moving data to/from the drive.
Mode:	• Multiword		This option cannot be changed when Auto is selected.
	DMA 1
	• Multiword
	DMA 2
	• Ultra DMA 0
	• Ultra DMA 1
	• Ultra DMA 2

Exiting from Main Menu

When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu. If you wish to move to another menu, use the cursor keys.

7