Fujitsu A3040 manual Secondary Master Submenu of the Main Menu, Exiting from Main Menu

M a i n M e n u

Secondary Master Submenu of the Main Menu

The Secondary Master submenu identifies the characteristics of the Secondary Master device installed.

					BIOS SETUP UTILITY
			Main
			Secondary Master:				Select ATA/ATAPI drive
			Device	:ATAPI CDROM			installed here.
			Vendor	:MATSHITADVD-RAM UJ841S			[Auto]
			LBA Mode	:Supported			The BIOS auto-types the
			PIO Mode	:4			drive on boot time.
			Async DMA	:MultiWord DMA-2
			Ultra DMA	:Ultra DMA-2			[None]
							The drive is disabled.
			Type		[Auto]
							F1: Help	Esc: Exit
			v02.59 (C) Copyright 1985-2006, American Megatrends, Inc.
					Figure 3. Secondary Master Submenu
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu
Menu Field		Options			Default	Description
Type:		■	Auto		[Auto]	Selects the ATA/ATAPI device type. To change the selection, press
		■	None			the spacebar. Select Auto to have the type automatically identified
						by the BIOS at POST. If None is selected, all of the following Set-up
						items do not appear.
■	Device				–—	These items are automatically determined by the system at POST
	Vendor					and display the characteristics of the Primary Master device. They
■						cannot be changed by the user.
■	LBA Mode
■	PIO Mode
■	Async DMA
■	Ultra DMA

Exiting from Main Menu

When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu. If you wish to move to another menu, use the cursor keys.

7