Fujitsu A3110 manual Drive0 Submenu of the Main Menu, Drive0 device

L i f e B o o k A S e r i e s B I O S

Drive0 Submenu of the Main Menu

The Drive0 submenu identifies what ATA devices are installed and the default values and settings of the devices.

		BIOS Setup Utility
Main	Advanced	Security	Boot	Info	Exit
Drive0:					Select Serial ATA/IDE
Device		:Hard Disk			drive installed here.
Vendor		:FUJITSU MHV2120AT PL			[Auto]
Maximum Capacity		:120.0GB
					The BIOS auto-types the
LBA Mode		:Supported
					drive on boot time.
Block Mode		:16Sectors
PIO Mode		:4			[None]
Async DMA		:MultiWord DMA-2			The drive is disabled.
Ultra DMA		:Ultra DMA-5
S.M.A.R.T.		:Supported
Type			[Auto]
					F1: Help	Esc: Exit
	vv
	v02.59 (C)Copyright 1985-2006, American Megatrends, Inc.

Figure 2. Drive0 Master Submenu

Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu

Note that the information displayed on this screen may differ from that which appears on your screen, depending upon your system configuration.

Menu Field	Options	Default	Description
The fields that appear on this screen are for display only, and reflect the default settings for the Drive0 device.
Device	---	Hard Disk	Displays the type of Drive0 ATA/IDE drive.
Vendor	---	(Device Name)	Displays the maker of the Drive0 device.
Maximum	---	(HDD Size)	The maximum capacity of your hard disk
Capacity:
LBA Mode	---	Supported	Displays whether Logical Block Addressing is supported by the
			device.
Block Mode	---	16 Sectors	Displays the number of sectors per block.
PIO Mode	---	4	Displays the method for moving data to/from the Drive0 device.
Async DMA	---	Multiword	Displays the Multiword DMA method for moving data to/from the
		DMA-2	Drive0 device.

6