IBM 2824, 2809 manual No Yes

Page 13

Figure 6. Install Adapter Card

__ 9. Do you have any other adapter cards or devices to install?

No Yes

If you know where to install the adapter card, follow the steps you just performed to install the card.

If you do not know where to install the adapter card, go to the instructions that came with the adapter card. Look for the tables or steps that tell you where to install the adapter card and complete the installation.

If you have another device such as a disk unit, a tape unit, or a memory card to install, go to the instructions that came with that device.

__ 10. Install the Expansion unit side cover by aligning the tabs on the top and bottom edge and press forward to make sure that all tabs enter the slots. Slide the cover toward the front of the system unit until it stops and install the screws (Figure 7 on page 8).

Installation Instructions

7

Image 13
Contents 2809 or 2824 LAN/WAN Workstation Card Instruction Page 2809 or 2824 LAN/WAN Workstation Card Instruction Fifth Edition July Safety and Environmental Notices Laser Safety Information Installation Instructions Remove System Unit Back Cover Getting ReadyAdapter Card Positions Installing the 2809 or 2824 LAN/WAN Workstation CardRemove System Unit Side Cover Attach Wrist Strap Remove Slot Cover No Yes Install Side Cover Completing the InstallationYes No No Yes Copyright IBM Corp Industry Canada Compliance Statement IBM-CALL TrademarksPage Readers’ Comments We’d Like to Hear from You Business Reply Mail Page SENG-2809-04