IBM CONNECTX-2 manual Part number information, Features and benefits, Performance

Page 2

Part number information

The part number to order this card is shown in Table 1.

Table 1. Ordering part number and feature code

Description

Part number

Feature code

 

 

 

Mellanox ConnectX-2 Dual Port 10 GbE Adapter for IBM System x

81Y9990

A1M4

 

 

 

The adapter has two empty SFP+ cages that support either SFP+ SR transceivers or twin-ax direct-attached copper (DAC) cables as listed in Table 2.

Table 2. Supported transceivers and direct-attach copper (DAC) cables

Description

Part number

Feature code

 

 

 

IBM 10Gb SFP+ SR Optical Transceiver (BN-CKM-SP-SR)

44W4408

4942

 

 

 

IBM/BNT 10Gb SFP+ SR Optical Transceiver

46C3447

Not available

 

 

 

IBM/Brocade 10Gb SFP+ SR Optical Transceiver (IB-000180)

45W2411

2117

 

 

 

IBM/Brocade 10Gb SFP+ SR Optical Transceiver

49Y4216

0069

 

 

 

IBM/QLogic 10Gb SFP+ SR Optical Transceiver (SFP10-SR50-IBMX-BK)

49Y4218

0064

 

 

 

IBM Twinax Direct Attach Cable (DAC) - 1m

45W2398

2711

 

 

 

IBM Twinax Direct Attach Cable (DAC) - 3m

45W2408

2731

 

 

 

IBM Twinax Direct Attach Cable (DAC) - 5m

45W3039

2751

 

 

 

Features and benefits

The Mellanox ConnectX-2 Dual Port 10 GbE Adapter for IBM System x has the following features:

Performance:

Based on ConnectX-2 EN technology, the PCI Express 2.0 x8 adapter provides a high level of throughput performance for all network environments by removing I/O bottlenecks in mainstream servers that are limiting application performance. Servers supporting PCI Express 2.0 with 5 GTps can fully utilize both 10 Gbps ports and achieve up to 40 Gbps duplex bandwidth. Hardware-based stateless offload engines handle the TCP/UDP/IP segmentation, reassembly, and checksum calculations that would otherwise burden the host processor. These offload technologies are fully compatible with Microsoft RSS and NetDMA.

RDMA over Ethernet (RDMAoE) further accelerates application run time. The RDMAoE specification provides efficient data transfer with very low latencies on lossless Ethernet networks. RDMAoE enables lowest latency memory transaction, with less than 2µs at full bandwidth with small message size. This allows very high volume, transaction intensive applications typical of financial market firms and other industries where speed of data delivery is paramount to take advantage. With Mellanox ConnectX-2 Dual Port 10 Gbe Adapter, high frequency transaction applications are able to access trading information with shorter times, making sure the trading servers are able to respond first to any new market data and market inefficiencies, while the higher throughput enables higher volume trading, maximizing liquidity and profitability.

Mellanox ConnectX-2 Dual Port 10 GbE Adapter for IBM System x

2

Image 2
Contents Mellanox ConnectX-2 Dual Port 10 GbE Adapter for IBM System Did you know?Performance Features and benefitsPart number information Virtualization SpecificationsQuality of Service Operating environment Physical specificationsWarranty Supported servers Supported operating systemsRelated publications For more information refer to these documentsCopyright License Trademarks IBM