Fujitsu D1386 technical manual Replacing the lithium battery, + +

Page 20

Add-on modules

Replacing the lithium battery

!

Incorrect replacement of the lithium battery may lead to a risk of explosion.

The lithium battery must be replaced with an identical battery or a battery type

 

recommended by the manufacturer (CR2032).

Do not throw lithium batteries into the household waste. They must be disposed of in accordance with local regulations concerning special waste.

Ensure that you insert the battery the right way round. The plus pole must be on the top!

The following graphic representation is also valid if the lithium battery is built-in vertically.

++

1

+

 

2

3

 

 

 

 

+

ÊLift the contact (1) a few millimetres and remove the battery from its socket (2).

ÊInsert a new lithium battery of the same type into the socket (3).

12 - English

A26361-D1386-Z120-1-7419

Image 20
Contents Component Are there Page A26361-D1386-Z120-1-7419 Systembaugruppe D1386 System Board D1386 Technisches Handbuch Technical ManualPage Contents Page Notational conventions IntroductionImportant notes Information about boards Important notesFeatures External ports VGAInternal ports and connectors 15 14LAN connector Hard disk connectionScreen resolution PCI bus interruptsSettings with switches and jumpers Recovering System Bios switchAdd-on modules Installing and removing processors Installing a memory module Upgrading main memoryReplacing the lithium battery + +Glossary