Fujitsu D1382 technical manual Replacing the lithium battery, + +

Page 21

Add-on modules

Replacing the lithium battery

!

Incorrect replacement of the lithium battery may lead to a risk of explosion.

The lithium battery must be replaced with an identical battery or a battery type

 

recommended by the manufacturer (CR2032).

Do not throw lithium batteries into the household waste. They must be disposed of in accordance with local regulations concerning special waste.

Ensure that you insert the battery the right way round. The plus pole must be on the top!

The following graphic representation is also valid if the lithium battery is built-in vertically.

++

1

+

 

2

3

 

 

 

 

+

ÊLift the contact (1) a few millimetres and remove the battery from its socket (2).

ÊInsert a new lithium battery of the same type into the socket (3).

A26361-D1382-Z120-1-7419

English - 13

Image 21
Contents Component Are there Page A26361-D1382-Z120-1-7419 Technisches Handbuch Technical Manual Systembaugruppe D1387 System Board D1387Page Contents Page Introduction Important notesNotational conventions Important notes Information about boardsFeatures VGA External portsCOM2 Internal ports and connectorsTemperature monitoring Temperature / System monitoringHard disk connection LAN connectorPCI bus interrupts Screen resolutionRecovering System Bios switch Settings with switches and jumpers Add-on modules Installing and removing processors Upgrading main memory Installing a memory module+ + Replacing the lithium batteryGlossary