External ports
Interfaces and connectors
The positions of the interfaces and connectors are shown on page "Cover".
The components and connectors marked are not necessarily present on the mainboard.
External ports
The positions of the external ports are shown on page "Cover".
|
|
| PS/2 keyboard port, purple |
| PS/2 mouse port, green |
|
|
| Serial interface, turquoise |
| Parallel port/Printer, burgundy |
|
|
|
|
| |
LAN |
|
| USB - Universal Serial Bus, black | ||
|
| ||||
LAN connector |
| ||||
| |||||
|
|
| Audio output (Line out), light green |
| Microphone jack (mono), pink |
|
|
| Audio input (Line in), light blue |
| VGA port, blue (monitor) |
LAN connector
This mainboard has an ADMtek AN983B LAN controller. The LAN controller supports transfer speeds of 10 Mbit/s and 100 Mbit/s. The LAN controller is equipped with a 3 KB transmission and receiving buffer (FIFO) and supports WOL function through Magic Packet.
It is also possible to boot a device without its own boot hard disk via LAN. Here bootix® LAN BootP or bootix® PXE are supported.
The LAN RJ45 connector has two LEDs (light emitting diodes).
| 1 |
|
| 2 |
|
|
| ||||
|
|
|
| ||
1 = | lights green: | a connection exists (e.g. to a hub). | |||
| flashes green: | Activity | |||
2 = | glows yellow: | 100 Mbit/s | |||
| off: | 10 Mbit/s | |||
8 - English |