Fujitsu V3.0.0 manual System Condition Display

Item	Explanation
	- For the L-Server CI type: The L-Server name set during L-Platform subscription
	or L-Platform reconfiguration ("server name (host name)")
Record	Displays the type of records held by the configuration item.
	[0], indicating the actual information, is displayed.

Note

Clicking the CI list column headers to sort the columns is effective only for the range displayed in that page. The sorting specification is reset when the next or previous page is displayed. Sorting spanning multiple pages is not available.

3.2.1 System Condition Display

The system condition of the L-Platforms selected in the system condition window CI list is displayed as a graph at System Condition in the lower part of the window. Up to five L-Servers can be displayed at once in the graphs. If more than five L-Servers are selected, the first five are displayed.

The system condition contents can be switched by clicking the System Condition tabs.

The table below shows the contents under the System Condition tabs.

Tab name	Display content (*1)	Graph type	Display interval	Display
				interval
				switching (*2)
Total	Totals for each status	Vertical bar graph	30 minutes, starting from the current time	Not possible
CPU	CPU utilization	Horizontal	One hour/day/month/year from the current	Possible
		polyline graph	time
Disk	Disk R/W Usage (*3)	Horizontal	One hour/day/month/year from the current	Possible
		polyline graph	time
	Disk R/W count (*4)	Horizontal	One hour/day/month/year from the current	Possible
		polyline graph	time
Memory	Memory usage (*5)	Horizontal	One hour/day/month/year from the current	Possible
		polyline graph	time
Network	Network usage (*6)	Horizontal	One hour/day/month/year from the current	Possible
		polyline graph	time
All	Overview of all the above	Horizontal	One hour/day/month/year from the current	Possible
	statuses	polyline graph	time

*1: Information is displayed using a different color for each L-Server.

*2: The display interval can be switched to a shorter interval by clicking the data plotting area of a horizontal polyline graph, or switched to a longer interval by clicking outside the data plotting area.

*3: Disk usage and network usage are not displayed if the virtualization software is Hyper-V and RHEL5-Xen.

*4: The disk R/W count is not displayed if the virtualization software is Hyper-V and RHEL-KVM.

*5: The memory usage is not displayed if the virtualization software is Hyper-V. However, it is displayed if the dynamic memory setting is enabled.

*6: The network usage is not displayed if the virtualization software is Hyper-V and the physical L-Server is Linux.

Note

-Information obtained from virtualization software is displayed in the system condition. Virtual Memory usage is not included.

- 14 -