Fujitsu specifications FCN-240R Series IDC ROUND-CABLE Connectors, Stand

240 Series (General-Purpose Type)

Semi-Automatic Tools

Cable Aligning Machine

Main Body (FCN-M551-120, FCN-M551-220)

Head (FCN-H550-1/A) Stand (FCN-D550)

Wires

Clamp lever

Cover 2

Cover 1

Applicator

Sinking comb

Clamp section Applicator

Stand	Cable key
		Bed
1. Set the applicator on the stand.	2. Push the wire into the sinking	3. Set the applicator onto the
Set covers 1 and 2 in the applicator.	combs.	installation table and begin
		cable alignment

Lock Handle

Lever

Applicator (FCN-A550-1/A-xxx)	IDC Tool (FCN-237T-T109/H,
	FCN-237T-T067/H locator)

Guide

Stopper

4. Take the covers off the	5. Put covers together and	6. Conduct final aaembly as shown.
applicator.	pre-assemble them to
	the connector body.

FCN-240R SERIES IDC ROUND-CABLE CONNECTORS

SOCKET: FCN-247J***-G/E (***: 020, 028, 036, 050, 068 ,080, 096)

Pos No.	Applied Wire	Connector Part	Cable Aligner		IDC Tool
	(wire Dia.: mm)	number	Hand Tool	Semi-Auto
20		FCN-247J020-G/F	FCN-237T-T062/H		HAND PRESS:
#28 to #30	(See below*)	FCN-237T-T109/H
			68	FCN-247J080-G/F	FCN-237T-T043/H
		HEAD & Locator:
	(0.5 to 0.65)
96		FCN-247J096-G/E	FCN-237T-T062/H		FCN-247T-T066/H
Semi-automatic-Medium Level
Body:	:FCN-M551-120
Head Assembly: :FCN-H550
Applicator:	:FCN-A550-1/A-***(***: 020, 028, 036, 050, 068, 080)
Stand:	:FCN-D550

Specifications	Dimensions are in millimeters (inches)	www.fcai.fujitsu.com	11
subject to change