IBM 1454, 1464 manual Configure for TCP/IP, Assigning a printer IP address

Page 17

also provides important information that helps you configure for network printing.

Note: If an optional MarkNet print server is installed, you see Print Net1 Setup on the display.

1Make sure the printer is on.

2Press Menu until you see Utilities Menu, and then press Select.

3Press Menu until you see Print Net Setup, and then press Select. The network setup page prints and the printer returns to Ready status.

4Check the first section on the network setup page and confirm that Status is “Connected.”

If Status is “Not Connected,” your LAN drop may not be active or your network cable may be malfunctioning. Consult your network support person for a solution, and then print another network setup page to verify that you are connected to your network.

Configure for TCP/IP

If you have TCP/IP available on your network, we recommend that you assign an IP address to the printer.

Assigning a printer IP address

If your network is using DHCP, an IP address is automatically assigned after you connect the network cable to the printer.

1Print a network setup page.

2Look for the address under the “TCP/IP” heading on the network setup page.

Connection guide

Page 4 of 9

3Go to Verify printer setup on page 3 and begin with step 2.

Note: You can find instructions for other methods of setting the IP address in the online documentation on the drivers CD that shipped with your printer. Launch the CD, and then click View

Documentation Network Printer Install.

If your network is not using DHCP, then you must manually assign an IP address to the printer.

One of the easiest ways is to use the operator panel:

1Press Menu until you see Network Menu, and then press Select.

2Press Menu until you see Standard Network, and then press Select.

Standard Network appears if you purchased a printer with a network port on the printer system board. If you have a MarkNet™ print server installed in the option card slot, you see Network Option 1.

3Press Menu until you see Std Net Setup (or Network 1 Setup), and then press Select.

4Press Menu until you see TCP/IP, and then press Select.

5Press Menu until you see Set IP Address, and then press Select.

6Change the address by pressing Menu to increase or decrease each number. Press Select to move to the next segment. Press Select when you are finished.

The message Saved appears briefly.

7Press Menu until you see Set IP Netmask, and then press Select.

8Repeat step 6 to set the IP Netmask.

9Press Menu until you see Set IP Gateway, and then press Select.

10Repeat step 6 to set the IP Gateway.

11When you are finished, press Go to return the printer to the Ready state.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Help guide Page Help guide Page Help guide Color Menu Color quality guideManual Color BalanceSamples Frequently asked questions FAQ about color printing Solving color quality problemsIs it possible to increase the gloss in the printed output? What is Manual Color Correction?RGB Cmyk Load paper or other print media Printing guideLoading 500-sheet trays Loading the multipurpose feederLoading other input options Set Paper Type and Paper SizeClick Install Software Click Printer and Software Install drivers for local printingConnection guide WindowsSerial printing Using Windows 95 Windows 98 first editionMacintosh Creating a desktop printer icon MacintoshPrinting a menu settings Verify printer setupPrinting a network setup Double-clickPrint Center or Printer Setup UtilityAssigning a printer IP address Configure for TCP/IPDocumentation Network Printer Install Verifying the IP settings Install drivers for network printingPrinting configuration Operating system Click Install SoftwareClick File Sharing Install a custom printer driverClick Finished Click Network Print Server Install the printer driver or subset on network clientsChoose Printing à Change Setup Install a custom PPD fileMac OS 8.6 to Create a desktop printerNetWare Using AppleTalkPrint media guide Print media guideAvoiding paper jams Storing paperClearing jams guide Access doors and traysClearing jams guide Area a Understanding jam messagesClearing the entire paper path Area D Area BArea C Area E Area T1Area Tx Area JArea L Clearing mailbox or output expander jams Area MArea K Clearing image transfer unit jams Clearing fuser jamsClearing finisher jams Areas 1 If you still need helpPrint quality guide Lines Streaked verticalPrint irregularities Print too lightToner specks When you handle the sheetsToner rubs off the paper easily GraySkewed print Incorrect marginsBlank pages Solid color pagesMoving the printer within the office Moving guidePreparing the printer for shipment Moving guidePage Readers’ Comments We’d Like to Hear from You Readers’ Comments We’d Like to Hear from You Business Reply MailPage Part Number 75P6580

1454, 1464 specifications

The IBM 1454 and 1464 are notable computing systems that have played a significant role in the evolution of technology. Introduced in the 1960s, these systems were part of IBM's early foray into mini-computers, which aimed to provide more accessible computing power compared to their larger mainframe counterparts.

The IBM 1454, which was designed with an emphasis on flexibility and adaptability, featured a modular architecture that allowed for various configurations based on user needs. It supported multiple programming languages, which made it versatile for a range of applications, from scientific calculations to business data processing. One of its main features was the capability to interface with peripheral devices, showcasing an early attempt at creating a more interconnected computing environment.

On the other hand, the IBM 1464 was an advancement over the 1454, boasting enhanced processing capabilities and memory management. It was specifically engineered for real-time applications, which was becoming increasingly important in industries such as telecommunications and manufacturing. The 1464 incorporated improved input/output operations, enabling faster data processing and more efficient use of hardware resources. This made it suitable for complex tasks that required immediate processing and feedback.

Both models utilized IBM’s proprietary technologies, including a unique assembly language and input/output channels that optimized data flow between the CPU and peripherals. They were also equipped with magnetic core memory, which, while basic by today's standards, was a cutting-edge feature at the time, providing both speed and reliability.

In terms of characteristics, the IBM 1454 and 1464 were compact for their time, designed to fit into space-constrained environments such as laboratories and business offices. They also came with comprehensive documentation and support, reflecting IBM's commitment to customer service and user education.

In summary, the IBM 1454 and 1464 were pivotal in defining the landscape of mini-computing during their era. With their modular designs, robust processing capabilities, and support for real-time applications, they laid the groundwork for future advancements in computer technology. Their legacy continues to influence modern computing systems, making them critical milestones in the history of information technology.
Top Page Image Contents