Fujitsu MAF3364FC, MAG3091FC, MAG3182FC manual Standard Features

Page 19

1.1Standard Features

(1)Compactness

The IDD has the FC-AL controller which supports the Arbitrated Loop (FC-AL) of the fibre channel modes defined by the ANSI standard, embedded in the 3.5-inch fixed disk drive form factor.

(2)FC-AL standard

The IDD provides not only FC-AL basic functions but also the following features:

∙Arbitration

∙Data frame CRC function

∙Command set which meets the logical specification of the SCSI CCS (Common Command Set for Direct Access Device) requirements (Rev. 4.B)

The SCSI commands can manipulate data through logical block addressing regardless of the physical characteristics of the disk drive. This allows software to accommodate future expansion of system functions.

(3)Dual port support

In order to support dual ports, the IDD is equipped with two pairs of fibre channel driver/receiver.

(4)High speed data transfer

The data transfer rate on the fibre channel loop is 106.25 MB/s maximum. In addition, the large capacity data buffer of the IDD allows the user to make full use of the high speed data transfer capability of the fibre channel loop.

(5)High speed spindle motor

The IDD increases the number of revolutions of the spindle motor from conventional 7,200 rpm to 10,025 rpm. Increasing the number of revolutions of the spindle motor will make it possible to improve the data transfer rate and reduce the rotation wait time.

(6)Continuous block processing

The addressing method of data blocks is logical block address. The initiator can access data by specifying block number in a logically continuous data space without concerning the physical structure of the track or cylinder boundaries.

The continuous processing up to [64K-1] blocks in a command can be achieved, and IDD can perform continuous read/write operation when processing data blocks on several tracks or cylinder.

1 - 2

C141-E078-02EN

Page 18 Page 20
Image 19
Page 18 Page 20
Contents C141-E078-02EN Revision Record This page is intentionally left blank Eprom Functional LimitationsRelated Standards Preface Conventions MAG3091FC Model namesMAF3364FC MAG3182FCSafety Precautions Page Fibre Channel Interface Maintenance Manual Fibre Channel Interface SpecificationsManual Organization Fibre Channel Interface Product Contents Appendix a Locations of Connectors Glossary GL-1 Abbreviations AB-1 Figures Tables This page is intentionally left blank General Description Standard Features Hardware Structure System ConfigurationStandard Features Page Page MAF3364FC outer view Disk/head configuration Page FC-AL system configuration Hardware Specifications SpecificationsHardware Specifications Model name and part number FC-AL Function specificationsMAG3364FC Seek Time MAG series Seek Time Environmental/power requirements Environmental specificationsReliability Error rateMtbf = Page Data Space Cylinder configurationData Format Data Space Logical Data Block Addressing Defect ManagementMAF3364FC = 10400 MAG series = Zone layout and track capacity MAG series Zone layout and track capacity MAF3364FCAlternate spare area Spare area in cylinders 119,700 CLKs*1 20MHz Sector format Track skew/cylinder skewPage Format capacity Logical Data Block Addressing Alternate block allocation Defect Management Defect listPage Alternate block allocation by Format Unit command Alternate block allocation by Reassign Blocks command C141-E078-02EN This page is intentionally left blank Mounting Requirements External dimensions Installation RequirementsExternal dimensions MAF3364FC External dimensions MAG series IDD orientation MountingMounting frame structure Limitation of side-mounting HDC Surface temperature check pointService clearance area Air pressure adjustment hole Current waveform +12 VDC 11 Connector location of SCA2 type interface model AMP Interface connectorInstallation Page GND Setting Loop ID settingMode settings Motor start modeMounting Drives Mounting procedures Remark Checking connection Checking the IDD connection a Checking the IDD connection B Formatting Setting parameters C141-E078-02EN ∙ PER ArrePage Rlec DiscXffff X0XXXDismounting Drive This page is intentionally left blank Self-diagnostic functions Diagnostics and MaintenanceDiagnostics Maintenance Information Diagnostics Self-diagnosticsPage PER Test programs Maintenance Information Maintenance requirements C141-E078-02EN Revision label Revision numbersIndicating revision numbers Locations of Connectors Appendix a Locations of ConnectorsFigure A.1 Locations of connectors Interface FC-SCA Connector Signal Allocation Appendix B Connector Signal AllocationGND Model Names and Product Numbers Appendix C Model Names and Product NumbersModel name Data block Total Mounting Length Appendix D Fibre Channel Interface Functions Fibre Channel Interface Function SpecificationsTerminate Task Simple Queue TypeHead of Queue Type Ordered Queue Type ACA Type UntaggedTable D.1 Fibre channel interface function specifications2 Table D.1 Fibre channel interface function specifications3 Raen Uaen Eaen Reserve Release Copy Table D.1 Fibre channel interface function specifications5Mode Sense Receive Diagnostic ResultsSearch Block LOW Send DiagnosticPREVENT/ALLOW Medium Removal Search Block High Search Block EqualRead Buffer Diagnostic Read DataRead Defect Data Compare Copy & Verify Write BufferRecover ID Diagnostic Format IDDiagnostic Read ID Recover DataThis page is intentionally left blank LUN FREE, ARBITRATION, SELECTION, ReselectionCCS CDBPage Ascii ACKAEN ALTPMI MSGOEM PCAThis page is intentionally left blank Page

MAG3182FC, MAF3364FC, MAG3091FC specifications

Fujitsu has established itself as a leading provider of storage solutions, with a robust lineup that includes the MAG3182FC, MAG3091FC, and MAF3364FC hard drives. These models cater to the needs of enterprise and data center environments, focusing on reliability, performance, and advanced technology.

The Fujitsu MAG3182FC is a Fibre Channel hard drive designed for high-speed data transfer and optimal storage performance. With a capacity of 18.2 GB, it is built for applications requiring rapid access to data. The drive operates at a spindle speed of 10,000 RPM, ensuring quick data retrieval and low latency. It features a 2 Gbps Fibre Channel interface, which allows for fast communication between the drive and the server, making it ideal for environments that demand high throughput, such as transaction processing and database management.

Next in line is the Fujitsu MAG3091FC. This model takes the capabilities of its predecessor a step further with a capacity of 9.1 GB and similar 10,000 RPM speed. The MAG3091FC is also equipped with a 2 Gbps Fibre Channel interface, providing the same high-performance connectivity. Its reliability is enhanced with advanced error correction and a design that minimizes the risk of data loss, making it suitable for mission-critical applications where uptime is essential.

Lastly, the Fujitsu MAF3364FC hard drive is tailored for enterprise-level operations, featuring a capacity of 36.4 GB. It utilizes a 10,000 RPM spindle speed and is built with the same 2 Gbps Fibre Channel interface, ensuring swift access to stored data. The MAF3364FC stands out for its improved data integrity features, including sophisticated error correction codes and a robust design that enhances durability. Its higher capacity combined with fast access times makes it a versatile choice for data-intensive applications and large-scale storage solutions.

All three drives incorporate Fujitsu's commitment to innovation, featuring technologies like S.M.A.R.T (Self-Monitoring, Analysis, and Reporting Technology) for predictive failure analysis. They are designed to operate in demanding environments, ensuring that businesses can rely on them for consistent performance and data protection. In summary, the Fujitsu MAG3182FC, MAG3091FC, and MAF3364FC represent a powerful collection of enterprise-grade hard drives, providing advanced features and technologies that meet the rigorous demands of modern data storage needs.
Top Page Image Contents