Fujitsu MPC3064AT, MPC3096AT, MPC3102AT, MPC3084AT, MPC3043AT, MPC3032AT manual

Page 17

∙Hold by the DE section, do not directly touch the PCA unit unnecessarily.

b.Unpacking

a)Use a flat workplace, find which side of the pack is up and be careful not to have the wrong side facing upwards. Do not place the device directly on a hard table, place it on something soft such as a rubber mat.

b)Be careful not to apply any excessive force to the packed device when removing the shock absorbing material.

c)When taking the device out of the antistatic bag, be especially careful not to apply any excessive force to the PCA or to the interface connector section.

d)Never ever remove the DE seal label and screws and the DE cover.

c.Installation

a)When the power is ON, do not change the switch setting, or connecting, or disconnecting connectors.

b)Do not move the device or disconnect connectors with the power ON or until the disk drive unit comes to a complete stop after the power is turned OFF (about 30 seconds).

d.Packaging

a)Place the device in an antistatic vinyl bag along with a desiccant (silica gel).

b)It is recommended that you use the shock absorption cushion material and packaging that contained the device when it was delivered by Fujitsu.

If the same packaging material cannot be used, use a shock absorbent box that will transmit shocks directly to the device. When using this type of box, adequately protect the PCA surface and interface connector section.

c)Place a label showing which side is up and clearly stating the notes on handling on the outside of the packaging.

e.Delivery

a)As a rule, deliver as it is packaged and keep the up side up.

b)If delivering a single drive after it is unpacked, take it only a short distance. Also, use shock absorbent material to protect it against shock and vibration. Deliver an unpacked device in either of the allowable packed positions. Refer to Section 3.2 in Product Manual.

1 - 4

C141-F029-01EN

Page 16 Page 18
Image 17
Page 16 Page 18
Contents C141-F029-02EN Revision Record This page is intentinally left blank Preface DE is completely sealed. Do not open the DE in the field Conventions for Alert MessagesLiability Exception This page is intentinally left blank Important Alert Messages Important Alert ItemsTask Alert message Contents This page is intentionally left blank Figures This page is intentinally left blank Maintenance Rules for maintenance Maintenance Operation Confirmation Troubleshooting ProcedureMaintenance requirements Page Page Disk drive revision number Maintenance levelsDisplay of disk drive revision number Test Self-diagnosticsTools and test equipment Test flowchart Operation Confirmation Operation test Status register contentsDisposition for error register contents Troubleshooting disk drive replaced in field Diagnostic testTroubleshooting Procedure Troubleshooting procedure System level and field troubleshooting Troubleshooting at factory Spare Parts Spare Parts Disk Drive RemovalModel and parts numbers This page is intentinally left blank Fujitsu Canada INC Fujitsu Limited

MPC3064AT, MPC3032AT, MPC3043AT, MPC3084AT, MPC3102AT specifications

Fujitsu's MPC series of products, including the MPC3064AT, MPC3084AT, MPC3102AT, MPC3096AT, and MPC3043AT, represents a solid commitment to innovation in the realm of multi-purpose computing. Each model is designed to meet diverse performance needs while integrating advanced technology for reliability and efficiency.

The MPC3064AT is known for its high-performance capabilities, featuring a powerful processor that ensures smooth multitasking and quick execution of demanding applications. Its architecture allows for exceptional data handling, which is vital for enterprise-level tasks. Built with energy efficiency in mind, this model is ideal for organizations seeking to reduce their carbon footprint while maintaining superior performance.

Moving on to the MPC3084AT, this model elevates productivity through enhanced memory bandwidth and storage options. It is equipped with cutting-edge RAID technology, significantly improving data retrieval speeds and providing reliability through redundancy. This design is essential for businesses relying on critical data, ensuring that information remains accessible even during hardware failures.

The MPC3102AT stands out with its advanced security features. Incorporating robust encryption mechanisms, this model protects sensitive data from potential breaches. Furthermore, it supports virtualization technologies, allowing organizations to effectively utilize their hardware resources. The MPC3102AT is particularly suitable for environments where data integrity is paramount, such as financial institutions and healthcare organizations.

In contrast, the MPC3096AT is tailored for graphics-intensive applications. With enhanced graphics processing unit (GPU) capabilities, this model excels in rendering detailed visuals, making it an excellent choice for creative industries such as video editing and graphic design. Its superior display technology ensures that users experience outstanding clarity and precision, fostering an environment conducive to productivity and creativity.

Lastly, the MPC3043AT is characterized by its versatile connectivity options and scalability. It accommodates various peripheral devices, making it a flexible solution for diverse workplace needs. The model also supports modular upgrades, allowing businesses to enhance their systems as requirements evolve. This adaptability makes it a sound investment for organizations anticipating future growth.

In summary, Fujitsu's MPC3064AT, MPC3084AT, MPC3102AT, MPC3096AT, and MPC3043AT offer a range of features and technologies designed to meet the needs of various industries. From high-performance computing to enhanced security, these models exemplify Fujitsu's dedication to providing reliable, efficient, and technologically advanced solutions for modern business challenges.
Top Page Image Contents