CHAPTER 4 RETURNING REPAIRED UNIT
4.1Unpacking
4.2Packing
4.3Transportation
4.4Storage
4.1Unpacking
The following provides notes on unpacking a replacing MO disk drive:
•
•
•
•
Ensure flat and level working space, and pay attention to indication of upside and downside on a package box. Avoid placing the unit directly on a firm desk, etc. Handle a unit on a soft material such as rubber mat, etc.
When removing cushions, pay attention not to strain an MO disk drive.
When taking a unit out of an
If an MO disk drive is moved into a place where room temperature changes by 10 degrees Celsius, leave the unit packed for more than 2 hours after moving, for avoiding condensation.
4.2 Packing
The following provides notes on packing a replaced MO disk drive:
•
•
•
•
•
•
For packing, use the same cushions and a box as those provided upon delivery of a unit. If the same cushions and a box are unavailable, use a box with cushions that do not give physical shock to an MO disk drive.
Pack an MO disk drive with an MO cartridge removed (with the carriage locked).
When packing an MO disk drive, provide sufficient protection against damage on printed circuit surface and interface connectors.
Put an MO disk drive into an
Provide plainly visible signs indicating "THIS SIDE UP" and "HANDLE WITH CARE" outside a box.
Other provided materials (AC adapter, cable, media, etc.) should be kept separately. Do not pack them with an MO disk drive.