Fujitsu MHV2040AS, MHV2080AS, MHV2060AS manual Removal and Replacement Procedure

Page 29

CHAPTER 2 Removal and Replacement Procedure

2.1Spare Parts

2.2Disk Drive Removal

This chapter explains the procedure for removing and replacing the disk drive. It is assumed that the reader has a thorough knowledge of replacing the complete disk drive and replacing the power-interface cable.

When carrying out these procedures, note the following items.

Be sure to wear a wrist strap when removing the disk drive from the host system.

The disk drive must have been removed from the host system.

A power-interface cable to the disk drive must be disconnected.

Mounting is done by reversing the steps for removal.

To carry out maintenance properly, observe the following:

Place removed screws and other parts where they will not get lost or damaged.

Keep a record of all maintenance work.

Tighten screws securely but not excessively.

Before touching the PCA, wear a wrist strap and check it is grounded to discharge any static electricity from your body. This ensures that the worker will not electrically damage the PCA.

Do not push the DE cover under any circumstances.

C141-F073

2-1

Image 29
Contents MHV2080AS, MHV2060AS, MHV2040AS Disk Drive Maintenance ManualHandling of This Manual For Safe OperationRevision History This page is intentionally left blank Conventions for Alert Messages PrefaceOverview of Manual Liability Exception Operating EnvironmentStatic, Damage Important Alert ItemsImportant Alert Messages Data corruption Device damageDamage or Device damage This page is intentionally left blank Manual Organization Disk Drive Maintenance ManualThis page is intentionally left blank Contents Tables IllustrationsMaintenance and Diagnosis Rules for maintenance MaintenanceMaintenance requirements Data corruption Storage Store in dampproof packaging Maintenance levelsDisk drive revision number label Disk drive revision numberDisplay of disk drive revision number Test Self-diagnosticsTools and test equipment Test flowchart Disposition for error register contents Status register contentsOperation Confirmation Operation testDiagnostic test Troubleshooting ProcedureTroubleshooting procedure Troubleshooting disk drive replaced in fieldMHV2080AS, MHV2060AS, MHV2040AS Disk Drives System level and field troubleshootingTroubleshooting at factory This page is intentionally left blank Removal and Replacement Procedure Model and parts numbers Spare PartsDisk Drive Removal CSS Acronyms and AbbreviationsAcronyms and Abbreviations Index Index READER’S Comment Form This page is intentionally left blank C141-F073-01EN This page is intentionally left blank
Related manuals
Manual 280 pages 57.54 Kb

MHV2060AS, MHV2080AS, MHV2040AS specifications

Fujitsu's MHV series of hard disk drives, specifically the MHV2040AS, MHV2080AS, and MHV2060AS models, are designed to deliver efficient performance and reliability for a range of applications, particularly in desktop computing and entry-level servers. Each of these drives adheres to the Serial ATA (SATA) interface, which ensures compatibility across a wide range of systems and is known for its cost-effectiveness and simplicity.

The MHV2040AS features a storage capacity of 40GB, making it suitable for basic computing tasks including document editing, web browsing, and media playback. The MHV2060AS steps it up with a 60GB capacity, allowing for increased data storage needs while still maintaining a high level of performance. The largest of the trio, the MHV2080AS, offers an impressive 80GB of space, positioning it well for users who require additional room for applications, games, and multimedia files.

All drives in this series are equipped with a rotational speed of 5400 RPM, which strikes a balance between speed and power consumption. This speed is adequate for everyday tasks and allows for quick boot times and file access, making them ideal for home and small office environments. Additionally, the drives feature an average latency of 5.5 milliseconds, contributing to their overall performance in retrieving data.

In terms of technology, the MHV series employs a fluid dynamic bearing (FDB) motor, which not only enhances reliability but also reduces noise levels during operation. The FDB technology helps improve the longevity of the drives by minimizing wear on mechanical components. This characteristic is particularly important for users seeking quieter drives, especially in work environments that require minimal disruption.

The drives also incorporate advanced power management features that significantly reduce power consumption, making them an environmentally friendly choice for users mindful of their carbon footprint. These drives are equipped with energy-saving modes that optimize their performance when not in full use, ensuring lower operational costs and longer lifespan.

Overall, the Fujitsu MHV2040AS, MHV2080AS, and MHV2060AS hard drives provide a solid solution for users looking for dependable storage with a range of capacities to fit their needs. Their performance, combined with noise reduction technologies and energy efficiency, makes them a notable choice for various computing environments, from single-user desktops to small business applications.