Chapter 3 Installation
3 Installation
Remove carefully the board from the shipping box and check for any damages.
Disconnect your
| Jumper | Setting |
|
| Description |
|
|
|
|
|
|
| JP10 (5V/3V3) |
|
| VCC is set to 5V | |
|
|
| VCC is set to 3.3V | ||
|
|
|
| ||
|
|
|
|
|
|
Attach the adapter board to the evaluation board as shown below. The Ethernet jack has to face to the outer edge.
Ethernet jack
Note:
Make sure to jumper the board to 5V before connecting the
- 6 - | © Fujitsu Microelectronics Europe GmbH |