Husky HSK012HD manual Additional Features, Front Panel View

Page 6

HSK012HD MAN ENGL 090105 9/1/05 5:42 PM Page 4

10

1

2

3

4

5 6 7

89

FIGURE 1A (Front Panel View)

FIGURE 1B (Rear View)

1.12 Volt DC Accessory Socket for DC appliances (with overload protection)

2.Battery Level Status Pushbutton

3.LED Charging/Battery Level Indicators

4.ON/OFF Power Switch

5.Recharging Port

6.Area Light

7.Area Light ON/OFF Switch

8.Negative (Black) Jumper Cable

9.Positive (Red) Jumper Cable

10. Clamp Holder Tabs

ADDITIONAL FEATURES

Includes non-spillable, maintenance-free, heavy-duty, new high energy density 17 Amp hour, sealed battery.

Safe to use, transport, and store.

Requires no maintenance (other than recharging) for optimum operation Automatic taper charge for AC recharge

Molded high-impact case is tough and durable

Built-in emergency worklight with for roadside repairs and use in remote loca- tions without utility power

CAUTION: Use only adapters supplied with this unit. Never insert any other adapters into the charging or power receptacles on this unit.

4

Image 6
Contents HSK012HD MAN Engl 090105 9/1/05 542 PM Jump Start System Safety Information First AID Introduction Use the Husky START-IT Elite Jump-Start System toAdditional Features Front Panel ViewJump Starting Instructions HSK012HD MAN Engl 090105 9/1/05 542 PM CHARGING/RECHARGING Volt AC ChargingBattery Replacement Operation AS a 12 Volt Portable Power SupplyReplacement Parts Emergency WorklightBattery Disposal SpecificationsHSK012HD MAN Engl 090105 9/1/05 542 PM