Related service information
To remove the user HDP that you have forgotten, do the following:
1.Power on the computer by pressing and holding F1.
2.Enter the SVP. The IBM BIOS Setup Utility menu appears.
3.Select Password, using the cursor keys to move down the menu.
4.Select
5.Select either User HDP or Master HDP.
6.Enter the master HDP; then leave the New Password field blank and press Enter twice.
7.Press F10.
8.Select Yes in the Setup Configuration window.
The both user HDP and master HDP have been removed.
Power management
To reduce power consumption, the computer has three power management modes: screen blank (standby in Windows 95 and Windows NT) , standby (suspend in Windows 95 and Windows NT), and hibernation.
Note for standby mode and hibernation mode
Do not install or remove the UltraBay during standby mode or hibernation mode. The UltraBay of ThinkPad A21e supports only
Screen blank mode:
In screen blank mode, the following occurs:
vThe LCD backlight turns off.
vThe
vThe speaker is muted.
To enter screen blank mode, press Fn + F3. To end screen blank mode and resume normal operation, press any key.
Standby mode:
When the computer enters standby mode, the following events occur in addition to what occurs in screen blank mode:
vThe LCD is powered off.
vThe
vThe CPU stops.
To enter standby mode, do any of the following:
vPress Fn + F4.
vClose the LCD cover. (To prevent the computer from entering standby mode when the LCD is closed, click