Removing and replacing the front bezel
1.Remove the computer cover. See “Removing the computer cover” on page 5.
2.To release the front bezel from the chassis, press downward on the two plastic tabs 1 and push the bezel outward as shown.
3.To reinstall the bezel, align the plastic tabs 1 on the bottom of the bezel with the corresponding holes in the chassis, then snap it into position at the bottom and top of the chassis.
4.Go to “Completing the installation” on page 33.
Replacing the power supply
Attention:
Do not remove the computer cover or attempt any repair before reading the “Important safety information” in the Quick Reference that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Quick Reference or HMM, go to http://www.ibm.com/pc/support.
Note: You will need a phillips screwdriver.
1.Remove the computer cover. See “Removing the computer cover” on page 5. Note: For this procedure, it helps to lay the computer on its side.