IBM L200p manual Further information, Display modes

Page 24

Further information

Display modes

i If your computer has previously been used with

a CRT monitor and is currently configured to a display mode outside the range that the Flat Panel monitor can display, you may need to re-attach the CRT monitor temporarily until you have reconfigured the computer, preferably to 1600 x 1200 at 60Hz.

The display mode the monitor uses is controlled by the computer. Therefore, you should refer to your computer documentation for details on how to change display modes.

The image size, position and shape may change when the display mode changes. This is normal and the image can be readjusted using Image setup and the monitor controls.

Unlike CRT monitors, which require a high refresh rate to minimize flicker, TFT technology is inherently flicker-free. If possible, configure your computer for 1600 x 1200 addressability at 60Hz vertical refresh rate.

For the display modes listed below, the screen image has been optimized during manufacture.

Note: VESA timings are as detailed in the VESA “Display Monitor Timing Specification”. Version 1.0, Revision 0.8, Dated 09/17/98.

Factory set display modes

Addressability

Refresh rate

Horizontal frequency

 

 

 

 

 

 

640 x 480

60 Hz

31.5 kHz

640 x 480

75 Hz

35.0 kHz

640 x 480

85 Hz

37.5 kHz

 

 

 

640 x 350

70 Hz

31.5 kHz

 

 

 

720 x 400

70 Hz

31.5 kHz

 

 

 

800 x 600

60 Hz

35.2 kHz

 

 

 

800 x 600

75 Hz

37.9 kHz

 

 

 

800 x 600

85 Hz

48.1 kHz

 

 

 

832 x 624

75 Hz

49.7 kHz

 

 

 

1024 x 768

60 Hz

48.4 kHz

 

 

 

1024 x 768

75 Hz

60.0 kHz

 

 

 

1024 x 768

85 Hz

68.7 kHz

 

 

 

1152 x 870

75 Hz

68.7 kHz

 

 

 

1152 x 900

66 Hz

61.8 kHz

 

 

 

1280 x 1024

60 Hz

64.0 kHz

 

 

 

1280 x 1024

75 Hz

80.0 kHz

 

 

 

1600 x 1200 †

60 Hz

75.0 kHz

 

 

 

† Recommended

22

Image 24
Contents L200p First Edition April/2004 Contents Page English Page Setting up the monitor Product descriptionHandling instructions Kensington security slot Adjusting the monitor position Workplace preparationCaring for your monitor Connecting your monitor Figure aSwitching on your monitor Device driver installation Installing the device driver in Windows 95 or WindowsInstalling the device driver in Windows 2000 or Windows Me Installing the device driver in Windows XP Automatic Image setup Image setupImage setup for DOS Operating system installation steps Step System Manual Image setup Adjusting your LCD monitor Icon Direct access functionsUser controls Icon Monitor controlsOn-screen display OSD controls Initial appearance of OSDClock Input Signal Further information Display modesPower management Product disposalMove the mouse TAR Troubleshooting Problem Possible Suggested action Reference CauseSignal cable connector Help and service information Specifications With StandService information Description Video ColorGeography This section contains information on notices and trademarks Trademarks