IBM 6331 user manual Install Monitor, Power Cord

Page 2

E-2

INSTALL THE

MONITOR

•To connect the tilt/swivel base to the monitor, align hooks with the sockets on the bottom side of the monitor, and gently push the base towards the front of the monitor.

•The 15-pin D-shell signal connector on the signal cable connects easily to the video adapter output on your computer. Lock both screws on the connector to ensure a firm connection.

•Turn the computer power switch to ON. Then turn the monitor power switch to ON by pressing the switch inward. The green power light-emitting diode (LED) will light.

•Allow about 30 seconds for the CRT tube to warm up. Data will display on the screen.

•If your display fails to function properly, refer to the “Troubleshooting” section in this manual.

POWER CORD

•Check first to make sure that the power cord you use is the correct type required for your area.

•This monitor has a universal power supply that allows operation in a 100/120 V ac or 220/240 V ac voltage area. No user-adjustment is required.

•First connect the power cord into your monitor power input socket, and then plug the other end into a 3-pin ac outlet. The power cord can be connected to a wall outlet or the power output socket on your computer, depending on the type of power cord supplied with your monitor.

•For units to be used at 120 V ac:

Use a UL-Listed Cord Set consisting of a minimum No. 18 AWG, Type SVT or SJT three- conductor that is 4.5 m (15 ft) long and a parallel blade, grounding-type attachment plug rated 10 A, 125 V.

•For units to be used at 240 V ac (domestic use): Use a UL-Listed Cord Set consisting of a minimum No. 18 AWG, Type SVT or SJT three- conductor cord a maximum of 4.5 m (15 ft) long and a tandem blade, grounding-type attachment plug rated 10 A, 250 V.

•For units to be used at 220/240 V ac (outside of the United States):

Use a Cord Set consisting of a mininum No.18 AWG cord and grounding-type attachment plug rated 15 A, 250 V. The cord set must have the appropriate safety approvals for the country in which the equipment will be installed and marked HAR.

113393-0A-E.pm6

2

8/1/00, 6:38 PM

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Power Saving Packing ContentsUnpacking Procedure Introduction RepackingInstall Monitor Power CordUser Controls and Indicators Using the ON-SCREEN Menu Adjustment screen example horizontal position adjustmentIndividual Adjustment DISP. Freq Input frequency display Color selectionLanguage selection Servicing TroubleshootingSignal Connector Information Technical Specifications Preset Modes Ode S o lutio n Freq Es olution KHz

6331 specifications

The IBM 6331 is a robust and versatile mainframe computer that serves as an integral component of many enterprise-level IT infrastructures. Known for its reliability and performance, the IBM 6331 offers organizations the ability to handle extensive computational workloads, ensuring operational efficiency and data management.

One of the main features of the IBM 6331 is its impressive processing power. It is equipped with advanced multi-core processors that enhance the system’s ability to execute tasks concurrently. This parallel processing capability allows organizations to run multiple applications and processes simultaneously, significantly improving overall productivity. The system's architecture is designed to scale, accommodating growing business needs without compromising performance.

Another critical characteristic of the IBM 6331 is its comprehensive data management capabilities. With large storage capacities and advanced data retrieval mechanisms, it allows organizations to efficiently manage vast amounts of information. This ensures that data is readily accessible for analytics, reporting, and decision-making purposes. The IBM 6331 also supports various databases and data formats, making it highly flexible for diverse applications.

Security is a paramount concern for enterprises, and the IBM 6331 addresses this with robust security features. It incorporates advanced encryption technologies and access controls that protect sensitive information from unauthorized access and cyber threats. Moreover, the system includes built-in redundancy and failover capabilities, ensuring high availability and minimizing downtime in critical operations.

The IBM 6331 is also characterized by its interoperability. It is designed to work seamlessly with various operating systems, applications, and peripheral devices. This compatibility enhances the system’s utility in mixed IT environments, allowing organizations to leverage existing investments while adopting new technologies.

In terms of connectivity, the IBM 6331 comes equipped with advanced networking capabilities that facilitate fast data transmission and communication. It supports various protocols, ensuring that it can be integrated into different network architectures, enhancing its role in a connected enterprise environment.

Overall, the IBM 6331 stands out as a powerful mainframe solution tailored for modern business demands. With its advanced processing capabilities, robust security measures, extensive data management functionality, and versatility in integration, it continues to be a preferred choice for organizations looking to optimize their IT operations and support their digital transformation initiatives.
Top Page Image Contents