IBM L170 manual Operating System Corresponding Auto Setup procedure

Page 13

Auto Setup

ENGLISH

Auto Setup

The Setup Utility included on the installation

CD is for displaying dot patterns. They do not replace or modify the display driver.

The Auto Setup instructions require the monitor to be warmed up for 15 minutes. This is not required for normal operation.

By pressing the Auto key, you will have direct access to Auto Adjustment.

When you first use your monitor you must perform Auto Setup. This procedure sets up your monitor to process the video signals from your computer without image discoloration or smearing. After you perform Auto Setup, the settings are stored and used each time you turn on the monitor.

To optimise the displayed image a set-up utility is provided on the CD. Operation of the utility is dependent on the operating system on your computer. For correct operation locate the operating system on your computer from the table below and follow the appropriate instructions. You can choose to run AUTO SETUP for each operating system that you use. This means that if you sometimes use your monitor while running any version of Windows and sometimes also use it from within DOS (not a DOS window), you must run AUTO SETUP for both Windows and DOS. You can run versions of AUTO SETUP in any order.

FRANÇAIS

ESPAÑOL

The AUTO SETUP process only applies to the current

screen mode. When a new mode is selected, repeat this section to reset the monitor.

Operating System

Corresponding Auto Setup procedure

 

 

 

 

DOS

Auto Setup for DOS on page 12

 

 

Windows 95, WIndows 98,

Auto Setup for Windows 95, Windows 98,

Windows 2000,

Microsoft Windows NT®,

Windows NT, Windows 2000, Windows Me or

Windows XP on page 13

Windows Me or Windows XP

 

Before you begin AUTO SETUP for your computer:

1.Make sure the computer’s video mode is set in the range of the supported screen resolution shown in the Table on page 21.

You should perform AUTO SETUP for each screen mode you use.

COMPL & WARR JAPANESE ITALIANO

11

Image 13
Contents IBM ThinkVision L170 Monitor L170First Edition April/2004 Contents Page Product Description Setting up the monitorHandling Instructions Workplace Preparation Adjusting the Monitor PositionWorking Practices Caring for your Monitor Screen settingsBack HandsConnecting your Monitor Switching on your Monitor Driver installation for Windows 95 or Windows Device Driver InstallationClick the Change Monitor Type button Monitor CD Driver Installation for Windows 2000 or Windows MeDriver Installation for Windows XP Auto Setup Auto SetupOperating System Corresponding Auto Setup procedure Auto Setup for DOS Operating System Operating system installation stepsManual Setup User control features Adjusting Your LCD MonitorIcon Control Image Setup Brightness OSD Enter Description User controlsOperation Initial appearance of OSD On-screen display OSD controlsOSD functions Blue ManualOSD Icon on Display modes Further InformationAddressability Refresh Rate Factory Set Display ModesIndicator Power ManagementProduct Disposal StateProblem Possible Suggested Action Reference Cause TroubleshootingControls Select Image SetupProblem Possible Suggested Action Further Help Vesa DDC SpecificationsModel Type 6734-AC1 Service InformationThis section contains information on notices and trademarks Trademarks
Related manuals
Manual 32 pages 18.28 Kb

L170 specifications

The IBM L170 is a high-performance storage solution that caters to the increasing demands of modern data management. As enterprises continue to produce vast amounts of data, the need for efficient, reliable, and scalable storage systems has never been more critical. The L170 is designed to meet these needs with its innovative features, cutting-edge technologies, and robust characteristics.

One of the standout features of the IBM L170 is its impressive capacity. With support for a substantial amount of data, the L170 allows organizations to consolidate their storage requirements into a single, manageable solution. This capability is further enhanced by the system's modular design, which enables users to incrementally scale their storage as their data needs grow. This flexibility mitigates concerns about over-provisioning and ensures that enterprises can invest in storage resources wisely.

The L170 is built on IBM’s advanced storage technologies, including IBM Spectrum Scale, which provides a high-performance, distributed file system that can handle complex workloads across dynamic environments. This capability allows businesses to enjoy seamless data access and simplified management, even as they scale. Furthermore, the L170 supports data tiering, which intelligently places frequently accessed data on high-performance storage while relocating less-accessed data to more cost-effective mediums.

Security is another critical focus of the IBM L170, with built-in features to protect sensitive data against various threats. The system employs advanced encryption standards and data integrity measures to safeguard information at rest and in transit. Additionally, with IBM's continuous commitment to compliance and regulatory standards, the L170 aids organizations in meeting stringent data governance requirements.

In terms of performance, the IBM L170 boasts impressive throughput and low-latency access. This is achieved through IBM's unique caching algorithms and smart data placement techniques, which optimize read and write operations. This ensures that enterprises experience minimal downtime and rapid data retrieval, essential for mission-critical applications.

Overall, the IBM L170 represents a reliable, scalable, and secure storage solution that addresses the evolving needs of enterprises. Its combination of high capacity, advanced technologies, and robust security features make it an ideal choice for organizations looking to manage their data more effectively in an increasingly complex digital landscape. With the IBM L170, businesses can focus on their core operations while resting assured that their data is safe, accessible, and efficiently managed.