C
System configurator and
PRIMERGY RX600 S3 SAS | Status |
Section IV
SCSI Base Units
The system is equipped with a two channel Utra 320 onboard SCSI controller
including a full featured RAID controller with 256MB Cache (suporting the RAID level 0, 1, 5, 10, 50).
As option the
This
The following rules apply for the cabling:
The cables for the connection of the
For the connection of external Tape devices to the on board SCSI controller, also an additional cable is needed in the system. (plus cable to connect to the subsystem SX10, see configurator SX10)
ROM Battery Backup Unit
for
max. 1x per system
Overview SCSI-cabling of a PRIMERGY RX600 S3 SCSI Base Unit
Picture 1:
Two channels for Disks
1x3
onboardHDD SCSI / RAID
1x2 HDD
Picture 2:
Two ch. for Disks + int. Tape
1x3
onboardHDD SCSI / RAID
internal
Tape Devices
Picture 3:
One ch. for Disks + ext. Tape
1x3
onboardHDD SCSI / RAID
external
Tape Devices
optional
29160 Contr.
29160 Contr.
internal
Tape Devices
external Tape Devices
optional
29160 Contr.
29160 Contr.
external Tape Devices
external Tape Devices
optional
29160 Contr.
29160 Contr.
external Tape Devices
external Tape Devices
Configuration with 2 channels for Disk Drives
Picture 1
Both channels of the
For the connetion of internal tape devices an additonal SCSI controller is required, pls see section V
Configuration with 2 channels for Disk Drives plus internal Tape device
Picture 2
One channel of the
Configuration with 1 channels for Disk Drives plus external Tape device
Picture 3
One channel of the
D
Fujitsu Siemens Computers Enterprise Products PRIMERGY Server | 9 of 17 |