Fujitsu Siemens Computers E8210 manual Drive0 Selects the Drive0 Product

Page 5

M a i n M e n u

Table 1: Fields, Options and Defaults for the Main Menu

Note that the parameters listed in the following table may vary depending upon your system’s configuration.

Menu Field

Options

Default

Description

 

 

 

 

 

 

 

 

Drive0

Selects the Drive0

The product

Display the type of device on this ATA/IDE interface. Pressing the

 

Serial ATA drive

number of the hard

Enter key selects the Serial ATA Drive0 submenu allowing additional

 

submenu

drive.

device configuration options for this interface.

 

 

 

 

Drive1:

Selects the Drive1

The product

Display the type of device on this ATA/IDE interface, if there is one.

 

Serial ATA drive

number of the CD-

Pressing the Enter key selects the Serial ATA Drive1 submenu allow-

 

submenu

ROM drive.

ing additional device configuration options for this interface.

 

 

 

 

 

Language:

■

English (US)

[English (US)]

The default setting differs between the US/European and the

 

■

Japanese (JP)

 

Japanese model. Selects the display language for the BIOS.

 

 

 

 

 

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Fujitsu LifeBook Series Navigating through the Setup Utility Bios Setup UtilityEntering the Bios Setup Utility I n M e n u Fields, Options and Defaults for the Main Menu Main Menu Setting Standard System ParametersYear. MM/DD/YYYY for example 03/20/1998. You may Change each segment of the date separately. Move betweenSerial ATA drive Number of the CD Drive0 Selects the Drive0 ProductSerial ATA drive Number of the hard Logical Block Addressing LBA Following Setup items do not appearDrive0 Submenu of the Main Menu Drive1 Submenu of the Main Menu Cally identified by the BiosExiting from Main Menu Transfer Mode StandardFields, Options and Defaults for the Advanced Menu Advanced Menu Setting Device Feature ControlsSerial/Parallel Port Nal keyboard and mouse parametersUSB Features CPU FeaturesMiscellaneous Configurations Power button, Wake Up On LAN, and control volume settingsFIR User to set the mode for the infrared port Serial Port Disabled EnabledRed port is Enabled Printer or similar device. ECP Mode allows communicationKeyboard/Mouse Features Submenu of the Advanced Menu Display Internal Auto Video Features Submenu of the Advanced MenuInternal Device Configuration Submenu Internal Device Configurations Submenu of the Advanced MenuCPU Features Submenu CPU Features Submenu of the Advanced MenuWhen Enabled is selected, Legacy USB Emulation is enabled USB Features Submenu of the Advanced MenuKey are enabled. Note that enabling this feature may cause USB devices are available without a USB-aware OSDisables this feature Miscellaneous Configurations Submenu of the Advanced MenuEvent Logging Submenu Event Logging Submenu of the Advanced MenuBoot Info Exit Security Menu Setting the Security FeaturesExiting from the Security Menu Fields, Options and Defaults for the Security MenuHard Disk Security Submenu of the Security Menu Password Entry on Disabled Enabled Owner Information Submenu Owner Information Submenu of the Security MenuSecurity Chip Disabled Security Chip Setting Submenu of the Security MenuAble after reboot Is rebootedFields, Options and Defaults for the Boot Menu Boot Menu Selecting the Operating System SourceQuickBoot Disabled Enabled Enabled Fewer tests mean faster startup Boot-time DisabledExiting from Boot Menu Boot Device Priority Submenu of the Boot MenuExcluded from boot order Drive0CPU Speed 66 GHz Memory Slot Fields, Options and Defaults for the Info MenuInfo Menu Displays Basic System Information Fields, Options and Defaults for the Exit Menu Exit Menu Leaving the Setup UtilityPower Off Exit Saving
Top Page Image Contents