Cisco Systems WET200 manual Congratulations! Configuration is now complete

H. A message briefly notifies you that the system is restarting, then the Wireless tab’s Basic Settings screen appears, displaying your wireless network’s basic settings.

Select the Setup tab to display the Setup screen.

I. If the Bridge’s default IP address 192.168.1.226 conflicts with the addresses on your network, change the Bridge’s IP address as follows:

•To assign a static IP address, select Static IP Address from the drop-down menu, then fill out the Local IP Address, Subnet Mask, Default Gateway, Primary DNS, and Secondary DNS fields. Then click Apply.

•To have a DHCP server assign an IP address to the Bridge, select

Automatic Configuration-DHCP from the drop-down menu, then click Apply.

Congratulations! Configuration is now complete.

For additional information or troubleshooting help, please refer to the User Guide on the CD-ROM. Additional support is also available via e-mail or by phone.

24-Hour Technical Support	RMA (Return Merchandise Authorization)
800-326-7114	http://www.linksys.com/support
E-mail Support	FTP Site
support@linksys.com	ftp://ftp.linksys.com
Website	Sales Information
http://www.linksys.com	800-546-5797 (800-LINKSYS)
http://support.linksys.com

Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2007 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.

7060710NC-AI