Preparing for Installation

C H A P T E R

This chapter provides safety information and describes the tasks you must perform before you install the LightStream 100 ATM switch.

This chapter contains the following sections:

•Safety Recommendations

•Installation Environmental Conditions

•Conﬁrming the Contents of the Shipping Container

•LightStream 100 ATM Switch Components

Safety Recommendations

The following guidelines will help to ensure your general safety and protect the equipment:

•Keep the chassis area clear and dust-free during and after installation.

•Put the removed chassis cover in a safe place.

•Keep tools away from walk areas where you and others could fall over them.

•Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf and roll up your sleeves.

•Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.

•Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.

Preparing for Installation 2-1

LightStream 100 specifications

Cisco Systems LightStream 100 represents a significant advancement in networking technology, designed to address the growing demand for high-performance, reliable network communications. Launched in the mid-1990s, this product embodies a pioneering spirit, focusing on the need for robust switching and routing capabilities that cater to both enterprise and service provider environments.

At its core, the LightStream 100 is an Asynchronous Transfer Mode (ATM) switch, which was pivotal in transitioning from traditional circuit-switched networks to modern packet-switched infrastructures. This technology permits the simultaneous transmission of voice, video, and data, making it highly versatile in handling various types of traffic efficiently. The inherent capability of ATM to provide Quality of Service (QoS) ensures that different data streams receive appropriate prioritization, thus maximizing overall performance.

One of the standout features of the LightStream 100 is its modular architecture. This design allows for scalability and flexibility, enabling network operators to customize configurations based on specific requirements. The system supports a range of interface modules, including 25 Mbps to 155 Mbps ATM interfaces, facilitating connections for both local and wide-area networks.

In terms of management and monitoring, the LightStream 100 incorporates advanced software capabilities, including Cisco's proprietary IOS (Internetwork Operating System). This empowers network administrators with tools for configuration, performance analysis, and fault management. Additionally, support for SNMP (Simple Network Management Protocol) eases the integration with existing network management systems, thus enhancing operational efficiency.

Security features within the LightStream 100 were ahead of their time, incorporating elements like access control lists and virtual LANs (VLANs), which ensure that data remains secure while traversing shared network resources. Coupled with its high throughput capabilities, the LightStream 100 provides a reliable backbone for both enterprise operations and ISP deployments.

Another notable technology embedded within the LightStream 100 is its support for Integrated Digital Loop Carrier (IDLC) systems, allowing service providers to effectively manage and deliver voice services over their ATM networks. This functionality positioned the LightStream 100 as a strategic asset for telecommunications companies transitioning to more advanced network architectures.

In summary, Cisco Systems LightStream 100 stands out as an influential product in the evolution of networking technology. Its innovative ATM switching capabilities, modular design, robust management tools, and security features collectively contribute to its legacy as a cornerstone in the development of modern communication infrastructures.