Fujitsu Siemens Computers RX220 manual Section Processor, Section Memory, Section Graphics

B

System configurator and order-information guide

PRIMERGY RX220 Status 2005-12-20

Section II

Processor

There are 2 processor 940 pin sockets available. One CPU is included in each basic unit. It is also possible to upgrade a dual-processor system later on.

Two processors with different clock frequencies or different caches are not possible.

A multi-processor operating system is required for a dual-processor system.

2nd. CPU

S26361-F3167-E244

Opteron 244 with 1.8 GHz with 1MB SLC on Chip (SLC=Second Level Cache) and passive heat sink

occupies CPU socket

max. 1x per system

S26361-F3167-E246

Opteron 246 with 2.0 GHz with 1MB SLC on Chip (SLC=Second Level Cache) and passive heat sink

occupies CPU socket

max. 1x per system

S26361-F3167-E248

Opteron 248 with 2.2 GHz with 1MB SLC on Chip (SLC=Second Level Cache) and passive heat sink

occupies CPU socket

max. 1x per system

S26361-F3167-E250

Opteron 250 with 2.4 GHz with 1MB SLC on Chip (SLC=Second Level Cache) and passive heat sink

occupies CPU socket

max. 1x per system

S26361-F3167-E252

Opteron 252 with 2.6 GHz with 1MB SLC on Chip (SLC=Second Level Cache) and passive heat sink

occupies CPU socket

max. 1x per system

S26361-F3167-E254

Opteron 254 with 2.8 GHz with 1MB SLC on Chip (SLC=Second Level Cache) and passive heat sink

occupies CPU socket

max. 1x per system

S26361-F3167-E265

Opteron 265 with 1.8 GHz with 2x 1MB SLC on Chip (SLC=Second Level Cache) and passive heat sink

occupies CPU socket

max. 1x per system

S26361-F3167-E270

Opteron 270 with 2.0 GHz with 2x 1MB SLC on Chip (SLC=Second Level Cache) and passive heat sink

occupies CPU socket

max. 1x per system

S26361-F3167-E275

Opteron 275 with 2.2 GHz with 2x 1MB SLC on Chip (SLC=Second Level Cache) and passive heat sink

occupies CPU socket

max. 1x per system

Section III

Memory

1x or 3x

There are 8 memory slots available (4 banks, each bank consists of two slots => 2 modules per bank are necessary).

They can optionally be equipped with 512MB, 1GB, 2GB (or 4GB if available) registered DDR 400 PC3200 SDRAM modules. In every basic unit the first memory bank is already equipped with either 1GB, 2GB or 4GB memory,

so the memory extensions can still be configured up to three times for the second, third and fourth memory bank.

Note: Memory is directly connected to the CPU. So, if only one CPU is configured only 4 modules are possible.

Then 1x memory extension can be ordered. For a Dual CPU configuration 3x memory extension can be ordered.

Maximum configurable memory extension is 16 GB (or 28GB when 4 GB modules are available), depending on basic unit.

ECC with memory scrubbing and Chipkill is standard for RX220.

S26361-F3166-E521	S26361-F3166-E522
Main memory 1GB	Main memory 2GB
PC3200 registered DDR RAM	PC3200 registered DDR RAM
consisting of two modules	consisting of two modules
occupies 2 slots / 1 bank	occupies 2 slots / 1 bank
max. 1x or 3x per system	max. 1x or 3x per system
		as soon as available
S26361-F3166-E523	S26361-F3166-	E524
Main memory 4GB	Main memory 8GB
PC3200 registered DDR RAM	PC3200 registered DDR RAM
consisting of two modules	consisting of two modules
occupies 2 slots / 1 bank	occupies 2 slots / 1 bank
max. 1x or 3x per system	max. 1x or 3x per system

Section IV

Graphics

Graphics controller on-board (ATI Radeon, 16MB)

C

Fujitsu Siemens Computers	8 of 15
Enterprise Products PRIMERGY Server