Cisco Systems MDS 9216 manual Send documentation comments to mdsfeedback-doc@cisco.com

Page 12

Chapter 3 Connecting the Cisco MDS 9216 Switch

Connecting to a Fibre Channel Port

Send documentation comments to mdsfeedback-doc@cisco.com.

	Cisco MDS 9216 Switch Hardware Installation Guide
3-12	78-16165-01

Image 12

Contents Connecting the Cisco MDS Switch Connecting to the Console Port Preparing for Network ConnectionsConnecting to the Console Port on the Cisco MDS 9216 Switch Connecting to the COM1 Port Connecting to the COM1 Port on the Cisco MDS 9216 Switch Connecting to the Mgmt 10/100 Ethernet Port Default COM1 settings are as followsConnecting to a Fibre Channel Port Send documentation comments to mdsfeedback-doc@cisco.com Installing an SFP Transceiver and Fiber Optic Cable Removing an SFP Transceiver and Fiber Optic Cable Send documentation comments to mdsfeedback-doc@cisco.com Send documentation comments to mdsfeedback-doc@cisco.com