Cisco Systems BPX 8600 Series manual Cabinets Joined at the Top

Multi-Cabinet Installations (IPX 16/32)

Figure 2-4 Cabinets Joined at the Top

Top mounting

bracket

Securing screw

IPX	IPX	IPX cabinet 1	IPX cabinet 2
cabinet 1	cabinet 2

H8100

Step 2 Insert the mounting bracket between the underside of the cabinet and the lock nut so that the screw supporting the cabinet foot slides into the L shaped recess.

Step 3 Rotate the mounting bracket towards the second cabinet so that the straight recess slides around the screw in the second cabinet (Figure 2-6).

Step 4 Tighten the lock nuts to secure the mounting bracket in place (Figure 2-7). Step 5 Perform this procedure for both the front and the rear of the cabinet.

Figure 2-5 Bottom Mounting Bracket (IPX 16/32)

Bottom
mounting bracket	Insert first

H8101

Insert second

Installation 2-5