Cisco Systems 7200 VXR manual Total Sdram Sdram Bank 1 Quantity Product Number, MEM-SD-NPE-32MB=

Chapter 1 Cisco 7200 VXR Product Overview

Field-Replaceable Units

Table 1-10	NPE-300 Memory Specifications (continued)
Memory Type		Size	Quantity	Description	Location1
Secondary		256 KB	—	RM7000 processor, internal,	U49
cache				unified instruction and data cache
Tertiary cache		2 MB (fixed)	—	RM7000 processor, external cache	U7, U8,
					U9, U10,
					U17

1.Location on processing engine board. See Figure 1-9.

2.Bank 0 is used exclusively for packet memory and is not user configurable.

3.Bank 1 contains the Cisco IOS software, processor memory, and packet memory.

4.OTP = one-time programmable

Note The NPE-300 contains two banks of SDRAM. Both SDRAM banks are used for all packet memory requirements; however, bank 0 is used exclusively for packet memory and is set at a fixed configuration in the factory.

Bank 1 contains two user-configurable SDRAM slots, DIMM slot 2 and DIMM slot 3 (see Figure 1-9). Both slots in bank 1 can be populated by DIMMs of different sizes; however, the size of the DIMM in slot 2 must be greater than or equal to the size of the DIMM in slot 3, and the size of the DIMM in slot 3 can be zero.

Table 1-11		NPE-300 SDRAM DIMM Memory Configurations
Total SDRAM			SDRAM Bank 11	Quantity	Product Number2
323	MB + 32 MB		U45 (DIMM slot 2	1 32-MB DIMM	MEM-SD-NPE-32MB=
			only)
323	MB + 64 MB		U45 and U44	2 32-MB DIMMs	MEM-SD-NPE-32MB=
			or	or
			U45	1 64-MB DIMM	MEM-SD-NPE-64MB=
323	MB + 128 MB		U45 and U44	2 64-MB DIMMs	MEM-SD-NPE-64MB=
			or	or
			U45	1 128-MB DIMM	MEM-SD-NPE-128MB=
323	MB + 256 MB		U45 and U44	2 128-MB DIMMs	MEM-SD-NPE-128MB=

1.There are two user-upgradable SDRAM slots in bank 1. (Bank 0 is used exclusively for packet memory and is set at a fixed configuration in the factory.)

2.These products are also available as SDRAM upgrades. To order an upgrade, add an equal sign (=) after the product number, for example, MEM-SD-NPE-128MB=.

3.This 32 MB is fixed memory in SDRAM bank 0, socket U16. Socket U15 is never populated.

Cisco 7200 VXR Installation and Configuration Guide

1-22 OL-5013-09