Cisco Systems Cisco ME 3400E manual Front Panel, Switch Model Description

Chapter 1 Product Overview

Front Panel

Table 1-1		Cisco ME 3400E Models and Descriptions
	Switch Model		Description
	Cisco ME 3400E-24TS-M		24 10/100 FastEthernet downlink ports and 2 dual-purpose ports
			(2 10/100/1000BASE-T copper ports and 2 SFP1 module slots);
			supports removable AC- and DC-power supplies.
	Cisco ME 3400EG-12CS-M		12 dual-purpose ports and 4 SFP-module slots; supports removable
			AC- and DC-power supplies.
	Cisco ME 3400EG-2CS-A		2 dual-purpose ports and 2 SFP-module slots, AC-power input.

1. SFP = small form-factor pluggable.

Front Panel

Figure 1-1shows the Cisco ME 3400E-24TS-M front panel. The 10/100 Fast Ethernet downlink ports are grouped in pairs. The first member of the pair (port 1) is above the second member (port 2) on the left. Port 3 is above port 4, and so on. The dual-purpose ports are numbered 1 and 2. You can configure the dual-purpose ports as either copper-based 10/100/1000 ports or as fiber-optic SFP-module ports. See the “SFP Modules” section on page 1-5for more information.

Figure 1-1 Cisco ME 3400E-24TS-M Front Panel

1

2

6

3 4 5

280816

7

8 9

1	AC-power input connectors 1 and 2	6	Ethernet management port
2	DC-power input connectors (supports	7	10/100 Fast Ethernet downlink ports 1 to 24
	power feeds A and B)
3	LEDs	8	10/100/1000 ports
4	Alarm input port	9	SFP-module slots
5	Console port

Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide

1-2 OL-16447-01