Cisco Systems SFS 3012 quick start The power cable or power plug is damaged

Page 6
•The power cable or power plug is damaged.

vi

Ensure the ground connection on the power supply is correct and functioning before applying power to the Topspin system.

CAUTION: Always ground yourself before touching any internal Topspin system components to avoid damage from electrostatic discharge (ESD).

CAUTION: The Topspin system has two power cables. The operator must disconnect all power cables before attempting to remove the system from the rack.

CAUTION: Remove power cables by grasping the cable connector and pulling straight out.If the chassis comes equipped with a power-plug retainer, move the bail wire used to retain the plug to the side before attempting to remove the power plug. Replace power-supply cables be grasping the cable connector, align the connector with the power jack, and insert the connector straight into the jack.If the chassis comes equipped with a power-plug retainer, move the bail wire back into place to keep the power plug firmly in place.

CAUTION: The Topspin system contains lithium batteries. Do not attempt to replace or discard these batteries. The batteries may only be serviced by Topspin service personnel.

CAUTION: Observe and follow service markings. Do not service the Topspin system, except as explained in the Topspin documentation supplied with your system. Opening the chassis or removing the enclosure cover exposes you to electrical shock and may damage system components.

If one or more of the following situations occurs, remove power to the Topspin system chassis, and contact your Topspin support representative:

•The power cable or power plug is damaged.

•The system has been exposed to water.

•The system has been dropped or damaged in any way.

•The system does not operate correctly after following the installation instructions.

CAUTION: You must ensure the operating environment has adequate air circulation. Keep the Topspin in a cool, well-ventilated room. Do not block cooling vents. Install filler panels into all unused slots.

CAUTION: Use only Topspin-approved gateway expansion modules, controller cards, fans, and power supply modules.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Cisco SFS 3012 Multifabric Server Switch Quick Start Guide Topspin 360 Quick Start Guide ReleasePart Number OL-7716-01 Product ID Copyright 2004 Topspin Communications, Inc. All rights reserved Document Version Part Number OL-7716-01 Product ID JulyInstall Topspin 360 FRUs ContentsTopspin 360 Package Contents Regulatory NoticesPage FCC Statement Safety InformationRegulatory Notices Electrical CautionsThe power cable or power plug is damaged General Cautions Laser CautionsTopspin P/N Contact InformationLaser Specs ApplicationTopspin 360 Package Contents Topspin 360 Quick StartRequirements Install Topspin 360 FRUs Prepare the SiteRack the Topspin Figure 1-1 Positioning the Side Flanges Figure 1-2 Fastening the Side FlangesFigure 1-3 Rail Positioning Figure 1-4 Attaching Rails from the Front Figure 1-5 Attaching Rails from the Back Figure 1-6 Positioning the Chassis on the Rails Figure 1-7 Sliding the Chassis onto the RailsBoot your Topspin 360 and Configure Basic Connectivity Assign a Static IP Address 3. Enter the interface mgmt-ethernet commandTopspin-360config# interface mgmt-ethernet Connect InfiniBand Hosts Obtain an IP Address with DHCPTopspin-360# copy running-config startup-config Figure 1-9 Fully Installed IB Cable with Pinch Connector Figure 1-10 Fully Installed IB Cable with Pull ConnectorFigure 1-11 Removing a Pinch Connector Install the Element Manager GUI 1. push connector toward port2. pull latch away from port 3. pull connector away from port Topspin-360config# clock set 192210 25 05 Configure the System ClockConfigure Time and Date TopspinEMConfigure NTP Topspin-360config# ntp server-one1. Launch your Web browser Launch Chassis ManagerTo launch Chassis Manager, perform the following steps Figure 1-13 Chassis Manager Log-In WindowPage Index
Related manuals
Manual 79 pages 27.09 Kb

SFS 3012 specifications

Cisco Systems SFS 3012 is a network switch designed to enhance the performance of data centers and enterprise networks. With its innovative architecture and advanced features, it caters to the increasing demands for high bandwidth and low-latency networking environments. This model leverages Cisco's expertise in networking technology to deliver reliable and scalable solutions for organizations.

One of the main features of the SFS 3012 is its ability to support high-speed data transfer with 10 Gigabit Ethernet (10GbE) ports. This provides significant improvement in data throughput, enabling faster communication between servers and network devices. With twelve 10GbE ports, the SFS 3012 is capable of handling intensive workloads, making it ideal for cloud computing and big data applications.

The SFS 3012 employs various networking technologies that enhance its operational efficiency. It supports data center bridging (DCB), which optimizes traffic flow and ensures low-latency communication for storage and server traffic. This feature is particularly beneficial in virtualization environments where multiple virtual machines operate simultaneously.

Additionally, the switch utilizes Cisco's innovative virtual extensible LAN (VXLAN) technology, enabling the creation of scalable, isolated virtual networks. This is crucial for enhancing network segmentation and security in multi-tenant data center environments. The ability to create virtual networks without the constraint of physical boundaries allows organizations to scale their networks seamlessly according to their needs.

Security is another critical characteristic of the SFS 3012. It implements advanced security protocols to protect the integrity of data transmissions. Features such as access control lists (ACLs), port security, and authentication protocols help safeguard sensitive information from unauthorized access.

Moreover, the SFS 3012 is designed with energy efficiency in mind. It incorporates features that minimize power consumption, helping organizations reduce their operational costs while also supporting sustainability initiatives.

In conclusion, the Cisco Systems SFS 3012 is a powerful network switch ideal for modern, demanding networking environments. With its high-speed connectivity, advanced networking features, strong security measures, and energy efficiency, it provides an effective solution for organizations looking to enhance their infrastructure and performance. As businesses increasingly embrace digital transformation, devices like the SFS 3012 will play a crucial role in supporting their growth and innovation.
Top Page Image Contents