Installation Warning Statements
This section includes the basic installation warning statements. Translations of these warning statements appear in the Regulatory Compliance and Safety Information for the Catalyst 2975 Switch document on the documentation CD.
Warning | To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure | |
|
| that the system remains stable. The following guidelines are provided to ensure your safety: |
|
| This unit should be mounted at the bottom of the rack if it is the only unit in the rack. |
|
| When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest |
|
| component at the bottom of the rack. |
|
| If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the |
|
| rack. Statement 1006 |
|
|
|
|
|
|
Warning | Only trained and qualified personnel should be allowed to install, replace, or service this equipment. | |
|
| Statement 1030 |
|
|
|
Before Attaching the Brackets
To install the switch in a rack, you must first remove the screws from the switch chassis so that the mounting brackets can be attached. For attachment at the
Catalyst 2975G
205084
Series
10