Cisco Systems 3750E-48PD-F manual About this Guide, Taking Out What You Need

Page 2

1About this Guide

This guide provides instructions on how to use Express Setup to initially configure your Catalyst switch. Also covered are switch management options, basic rack-mounting procedures, stacking procedures, port and module connection procedures, and troubleshooting help.

For additional installation and configuration information for Catalyst 3750-E switches, see the Catalyst 3750-E documentation on Cisco.com. For system requirements, important notes, limitations, open and resolved bugs, and last-minute documentation updates, see the release notes, also on Cisco.com.

When using the online publications, refer to the documents that match the Cisco IOS software version running on the switch. The software version is on the Cisco IOS label on the switch rear panel.

You can order printed copies of the manuals from the Cisco.com sites and from the telephone numbers listed in the “Obtaining Documentation” section on page 24.

For translations of the warnings that appear in this publication, see the Regulatory Compliance and Safety Information for the Catalyst 3750-E and Catalyst 3560-E Switch that accompanies this guide.

2Taking Out What You Need

Follow these steps:

1.Unpack and remove the switch and the accessory kit from the shipping box.

2.Return the packing material to the shipping container, and save it for future use.

3.Verify that you have received the items shown on page 3. If any item is missing or damaged, contact your Cisco representative or reseller for instructions. Some switch models might include additional items that are not shown on page 3.

4.For switches with the optional 1150-W power supply module (model C3K-PWR-1150WAC), install the power supply in the switch as described in the installation notes after you rack-mount the switch.

2

Image 2
Contents Catalyst 3750-E Switch Getting Started Guide About this Guide Taking Out What You NeedShipping Box Contents Running Express Setup Syst RPS Mastr Stat Duplx Speed Stack PoE Mode Page Page Refreshing the PC IP Address Managing the SwitchUsing the Device Manager Downloading Cisco Network Assistant Command-Line InterfaceUsing the switch console port Using the switch Ethernet management port Other Management OptionsPlanning Switch Stacks Stack Cabling Configurations Vertical StackingPower On Sequence for Switch Stacks Side-By-Side StackingBefore You Begin Rack-MountingEquipment That You Supply Installation Warning Statements Before Attaching the Brackets Attaching the Brackets Rack-Mount the Switch Connect the StackWise Cables Connect to 10/100/1000 PoE Ports Connect to the Switch PortsConnect to 10/100/1000 Ports Verify Port Connectivity Troubleshooting Express Setup Case of DifficultyFor More Information Resetting the SwitchAccessing Help Online Obtaining Documentation Cisco.comDocumentation Feedback Documentation DVDOrdering Documentation Reporting Security Problems in Cisco Products Cisco Product Security OverviewCisco Technical Support Website Submitting a Service RequestObtaining Technical Assistance Definitions of Service Request Severity Obtaining Additional Publications and InformationCisco 90-Day Limited Hardware Warranty Terms Duration of Hardware Warranty Page USA