Philips FWC577 Connecting to USB PC Link, Enable digital CD audio output, For Windows ME/2000/XP

		USB PC Link
	Enable digital CD audio output	Connecting to USB PC LINK
Before playing the CD through your PC’s		USB PC LINK allows you to playback your music
CD-ROM drive, it is necessary to configure your		collection from the PC via the powerful amplifier
PC’s hardware as follows:		and speakers of this system.

E n g l i s h

For Windows ME/2000/XP

1Enter the system control panel menu and select :

“SYSTEM ™ HARDWARE ™

DEVICE MANAGER ™ CD-ROM DRIVES ™ ACTION–PROPERTIES ™ PROPERTIES”.

OR

For Windows 98 (SE)

Enter the system control panel menu and select “MULTIMEDIA” and “CD MUSIC”.

2Check the ‘Enable digital CD audio for this CD-ROM device’ setting option is selected (enabled).

Note:

– You may need to refer to your PC’s manual for correct configuration.

IMPORTANT!

Make sure the MusicMatch software has been installed. Refer to “Quick Setup Guide” for USB PC Link.

	USB PC LINK		2
	VOL
	TITLE		3
			4
	ALBUM
REPEAT	SHUFFLE		5
DIM	SLEEP CLK/TIMER	TIMER ON/OFF

1

1Turn on your computer and launch the

“MUSICMATCH JUKEBOX”.

➜ The volume level of PC should not be put into mute.

2Press USB PC LINK.

➜If the audio streaming is detected,

“CONNECTING” is displayed and the USB indicator will be flashing.

➜If “NO CONNECTION” is displayed, check the connection between your PC and mini system.

3Press í or ë until the desired track in the playlist is highlighted.

4Press ÉÅto start playback.

➜ The track information will appear on the display. The display only supports English characters.

During playback,

–Press SHUFFLE to play all available tracks in the playlist in random order.

–Press REPEAT to repeat playback of all the tracks in the playlist.

5To exit, select another active mode or press Ç.

17