Compact Wireless-G USB Network Adapter with SpeedBooster
Setting Up the Adapter with SecureEasySetup
With SecureEasySetup, setting up the Adapter is as simple as pushing a couple of buttons. Before you press any buttons, you should locate the SecureEasySetup button on the device you’re connecting the Adapter to, such as a wireless router or access point.
NOTE: Your wireless router or access point must have Wireless SSID broadcast set to enable.
1.Press the Cisco logo or SecureEasySetup button on the wireless router or access point and wait until it turns white and begins to flash.
NOTE: You can only add one SecureEasySetup device at a time.
2.Click the SecureEasySetup button (circle with the lock) on the Setup Wizard screen. The logo or button will stop flashing on the wireless router or access point when the Adapter has been successfully added to the network. Repeat this procedure for any additional SecureEasySetup device.
3.When SecureEasySetup is complete, you may save your configuration to a text file by clicking the Save button, or print the configuration by clicking the Print button. Click Connect to Network to connect to your network.
Congratulations! Setup is complete.
To check the link information, search for available wireless networks, or make additional configuration
changes, refer to Chapter 5: Using the Wireless Network Monitor.
Chapter 4: Setting up and Connecting the USB Adapter
Figure 4-7: SecureEasySetup
Figure 4-8: Searching for Wireless Network
Figure 4-9: SecureEasySetup Complete
10
Setting Up the Adapter with SecureEasySetup