Cisco Systems WS-F4531 manual Aligned

Page 5

Installing the NetFlow Services Card

Figure 1 Aligning the NetFlow Services Card

Heat sink

 

84384

Step 5

Ensure that the connectors on the NetFlow Services Card are aligned with the connectors on

 

the supervisor engine, which should happen automatically when the mounting holes are correctly

 

aligned.

Step 6

Apply pressure to the NetFlow Services Card to seat the connectors.

Caution Use care not to damage the connectors on the supervisor engine. If you damage a connector, you will have to return the supervisor engine to Cisco for repair.

Caution Using the screws to seat the NetFlow Services Card could warp the card. Before you install and tighten the securing screws, ensure that the NetFlow Services Card is fully seated by visually verifying that there is no gap between the male and female keys on the connectors and that the bottom of the NetFlow Services Card is in contact with the tops of the standoffs.

Step 7 Using a Phillips screwdriver, install two screws at the front of the NetFlow Services Card and one screw at the power heat sink as shown in Figure 1.

Note Before installing the securing screws, visually verify that there are standoffs beneath the mounting holes.

Caution You must install all the screws. The screws provide grounding between the NetFlow Services Card and the module. Failure to install all screws will invalidate the safety approvals and pose a risk of fire and electrical hazard.

Step 8 Install the supervisor engine in the Catalyst 4500 series switch. (Refer to the Catalyst 4500 Series Module Installation Guide for installation instructions.)

Step 9 Power up the switch. If the switch comes online normally, the system has acknowledged the supervisor engine and the NetFlow Services Card and has brought them online.

Installing the NetFlow Services Card

 

78-15214-01

5

 

 

 

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Contents Overview Safety OverviewSafety Overview Required Tools Installing the NetFlow Services CardHardware and Software Requirements Aligned Obtaining Documentation Related DocumentationWorld Wide Web Documentation CD-ROMDocumentation Feedback Obtaining Technical AssistanceCisco.com Technical Assistance CenterTechnical Assistance Center 78-15214-01

WS-F4531 specifications

Cisco Systems WS-F4531 is a powerful and versatile line card designed for the Cisco Catalyst 4500 series switches. This series of switches is well-regarded for providing a robust and scalable networking solution suitable for enterprise environments. The WS-F4531 line card is focused on enhancing the performance and capacity of these switches, making it a critical component for organizations looking to upgrade their network infrastructure.

One of the standout features of the WS-F4531 is its support for high-density Gigabit Ethernet. It typically includes multiple ports capable of 10/100/1000 Mbps speeds, accommodating a wide range of devices, including computers, servers, and IP phones. This flexibility allows organizations to efficiently manage their network traffic and expand connectivity without needing significant infrastructure changes.

The card is built on Cisco's advanced IOS software, which provides security, quality of service (QoS), and traffic management capabilities. This software ensures that the line card can handle varied network demands while prioritizing critical applications and maintaining optimal performance. With features such as VLAN support and multicast routing, the WS-F4531 offers enhanced functionality that simplifies network management.

In addition, the WS-F4531 supports PoE (Power over Ethernet) options, enabling users to power Ethernet devices directly through the network cable. This is particularly beneficial for deploying IP phones and wireless access points, as it reduces the need for additional power sources and simplifies installation.

Another significant characteristic of the WS-F4531 is its modular design. The line card can be easily integrated into existing Cisco Catalyst 4500 series switches, ensuring a seamless upgrade path as network demands grow. This modularity allows for scaling-up capabilities without requiring a complete network overhaul.

The WS-F4531 also emphasizes reliability and resiliency, featuring redundant components and failover capabilities that protect against network downtime. This characteristic is crucial for organizations that require uninterrupted access to services and data.

Overall, the Cisco WS-F4531 line card combines high performance, scalability, and advanced features, making it an excellent choice for enterprises aiming to strengthen their networking infrastructure. Whether for enhancing connectivity, supporting critical applications, or managing increased traffic demands, the WS-F4531 serves as a vital component in modern enterprise networks.
Top Page Image Contents