Cisco Systems CB21AG, PI21AG manual Setting, What to Enter

Chapter 2 Configuring Wireless Profiles

Creating a New Profile and Configuring Basic Settings

Table 2-1	Profile Management General Settings (continued)
Setting		What to Enter
Start this connection		Check this check box if you want the device to connect automatically
automatically		whenever the wireless network is in range. If you do not check this
		check box, you must manually connect to this wireless network from
		the Connect to a network dialog box, which you can access through the
		Network and Sharing Center.
		Default: For the No authentication (Open) security type, this check box
		is unchecked. For all other security types, this check box is checked.
Connect even if the network		Check this check box if you want the device to attempt to connect even
is not broadcasting		if the wireless network is not broadcasting its name.
		Default: Not checked.

Step 8 After you enter all required settings, click Next. Another Manually connect to a wireless network dialog box appears (see Figure 2-6).

Figure 2-6 Manually connect to a wireless network Dialog Box—Successfully added <network name>

Step 9 Click Connect to to connect to a wireless network, including the one for which you have created a profile. Or click Change connection settings to change the profile settings. See the “Viewing and Changing the Settings of a Profile” section on page 2-13for more information.

Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista

OL-16534-01 2-9