C H A P T E R 2
Safety and Compliance
This chapter contains important safety guidelines and compliance information that you should read before beginning installation of the MGX 8260 media gateway. For additional information, refer to Appendix B, “System Specifications” .
Warning The MGX 8260 is intended for installation in restricted access areas. Only trained and qualified personnel should be allowed to install or replace this equipment.
General Safety Recommendations
Follow these guidelines to help ensure your safety and protect the equipment.
•Install the MGX 8260 in compliance with national and local electrical codes. In the United States, the relevant code is National Fire Protection Association (NFPA) 70, United States National Electrical Code. In Canada, it is Canadian Electrical Code, part I, CC22.1. In other countries, you should observe the standards of the International Electrotechnical Commission (IEC) 364, Parts 1 through 7.
•Never attempt to lift an object that is too heavy for one person to lift alone.
•Always switch all power supplies off and disconnect all power cables before opening, installing, or removing a Cisco hardware shelf.
•Keep the area clear and dust free during and after installation.
•Keep tools and chassis components away from walk areas.
•Do not wear loose clothing, jewelry (including rings and chains), or other items that could become trapped in the chassis. Fasten your tie or scarf and roll up your sleeves.
•Be sure to operate the MGX 8260 in accordance with its marked electrical ratings and product usage instructions to guarantee safe operation.
Cisco MGX 8260 Hardware Installation Guide
|
| ||
|
|