Cisco Systems Modular Gigabit Ethernet Line Card I manual

Page 6

Step 6 Use a Phillips screwdriver to insert and tighten the two screws on the faceplate of the line card, 3 to 5 in-lbs, as shown in Figure 8.

Caution Apply no more than 5 in-lbs of torque when tightening the screw.

Figure 8 Inserting the 2 screws on the Faceplate of the Line Card

PUSH

CORNERS

TO

INSTALL

PUSH

CORNERS

TO

INSTALL

129856

Inserting an EPA into a Modular Gigabit Ethernet Line Card

6

78-17296-01 A0

 

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Inserting an EPA into a Modular Gigabit Ethernet Line Card Mating the Connector of the EPA to the Line Card Push Push Press on the White Labels on the EPA Inserting and Tightening the Screw on the EPA Inserting the 2 screws on the Faceplate of the Line Card
Top Page Image Contents